MF1SPLUS6011DUD/03 NXP Semiconductors, MF1SPLUS6011DUD/03 Datasheet - Page 9

• Manufacturer Part Number: MF1SPLUS6011DUD/03
• Description: RFID Modules & Development Tools MIFARE CRYPTO1 AES 848Kbps 2KB
• Manufacturer: NXP Semiconductors

Specifications of MF1SPLUS6011DUD/03

• Security: MIFARE CRYPTO1, AES
• Product: Smart Card
• Data Rate: 848 Kbps
• Antenna: On-Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
9. Look-up tables
MF1SPLUSX0Y1_SDS_31
Product short data sheet
PUBLIC
8.6 Security level 3
9.1 Security level 0, 1, 3: ISO/IEC 14443-3
The operation in security level 3 is solely based on the ISO/IEC 14443-4 protocol layer.
The usage of the backwards compatibility protocol is not possible.
In security level 3, a mandatory AES authentication between PICC and reader is
conducted, where two keys are generated as a function of the random numbers from the
PICC and the reader as well as of the shared key. These two session keys are used to
secure the data which is exchanged on the interface between the card and reader. One of
the two keys is used to ensure the confidentiality of the command and the response while
the other key ensures the integrity of the command and the response.
All commands carry a MAC, such that the PICC will only accept commands from the
reader with which it is authenticated. Tampering of operands and messages is detected by
checking the MAC. Also all responses contain a MAC, so that the reader on each
response knows that neither the command nor the response has been tampered with.
Each response carries a MAC. When the appropriate MAC is received, due to linking of
MACs, the reader knows that the command and commands before it was properly
executed.
All commands between two consecutive first authenticate commands belong to one
transaction and the MACing mechanism assures integrity of the whole transaction.
Table 4.
Command
REQA
WUPA
ANTICOLLISION/SELECT
cascade level 1
ANTICOLLISION/SELECT
cascade level 2 for 7 byte
UID version
HALT
ISO/IEC 14443-3
All information provided in this document is subject to legal disclaimers.
Rev. 3.1 — 19 April 2010
Description
the REQA and ATQA commands are fully implemented according to
ISO/IEC 14443-3.
the WAKE-UP command is fully implemented according to
ISO/IEC 14443-3.
the ANTICOLLISION and SELECT commands are fully implemented
according to ISO/IEC 14443-3. The response is part 1 of the UID.
the ANTICOLLISION and SELECT commands are fully implemented
according to ISO/IEC 14443-3. The response is part 2 of the UID.
the HALT command is fully implemented according to
ISO/IEC 14443-3
187031
Mainstream contactless smart card IC
MF1SPLUSx0y1
© NXP B.V. 2010. All rights reserved.
9 of 17