KSZ8842-16MBL Micrel Inc, KSZ8842-16MBL Datasheet - Page 67

• Manufacturer Part Number: KSZ8842-16MBL
• Description: 2-Port Ethernet Switch/Repeater + Generic (8, 16-bit) Bus Interface ( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MBL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1635 - BOARD EVALUATION KSZ8842-16MVL576-1634 - BOARD EVALUATION KSZ8842-16MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3076

Bank 17 TXQ Command Register (0x00): TXQCR
This register is programmed by the Host CPU to issue a transmit command to the TXQ. The present transmit frame in the
TXQ memory is queued for transmit.
Bank 17 RXQ Command Register (0x02): RXQCR
This register is programmed by the Host CPU to issue release command to the RXQ. The current frame in the RXQ frame
buffer is read out by the host and the memory space is released.
Bank 17 TX Frame Data Pointer Register (0x04): TXFDPR
The value of this register determines the address to be accessed within the TXQ frame buffer. When the AUTO increment
is set, It will automatically increment the pointer value on Write accesses to the data register.
The counter is incremented by one for every byte access, by two for every word access, and by four for every double
word access.
Micrel, Inc.
Bit
15-1
0
Bit
15-1
0
Bit
15
14
13-11
10-0
October 2007
Default Value
-
0x0
Default Value
-
0x0
Default Value
-
0x0
-
0x0
R/W
RO
RW
R/W
RO
RW
R/W
RO
RW
RO
RW
Description
Reserved
TXETF Enqueue TX Frame
When this bit is set as 1, the current TX frame prepared in the TX buffer is queued for
transmit.
Note: This bit is self-clearing after the frame is finished transmitting. The software
should wait for the bit to be cleared before setting up another new TX frame.
Description
Reserved Do not write to this register.
RXRRF Release RX Frame
When this bit is set as 1, the current RX frame buffer is released.
Note: This bit is self-clearing after the frame memory is released. The software should
wait for the bit to be cleared before processing new RX frames.
Description
Reserved
TXFPAI TX Frame Data Pointer Auto Increment
When this bit is set, the TX Frame data pointer register increments automatically on
accesses to the data register. The increment is by one for every byte access, by two
for every word access, and by four for every doubleword access.
When this bit is reset, the TX frame data pointer is manually controlled by user to
access the TX frame location.
Reserved
TXFP TX Frame Pointer
TX Frame Pointer index to the Frame Data register for access.
This field reset to next available TX frame location when the TX Frame Data has been
enqueued through the TXQ command register.
67
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9