KSZ8842-16MVL Micrel Inc, KSZ8842-16MVL Datasheet - Page 100

• Manufacturer Part Number: KSZ8842-16MVL
• Description: 2-Port Ethernet Switch/Repeater + Generic (8, 16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MVL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1635 - BOARD EVALUATION KSZ8842-16MVL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-2119; KSZ8842-16MVL

Bank 48 Port 1 Control Register 2 (0x02): P1CR2
This register contains the global per port control for the switch function.
Micrel, Inc.
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2-0
October 2007
Default
0
0
0
0
0
1
1
0
0
0
0
0
0
0x7
R/W
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Description
Reserved
Ingress VLAN Filtering
1= the switch discards packets whose VID port membership in VLAN table bits [18:16]
does not include the ingress port VID.
0 = no ingress VLAN filtering.
Discard Non PVID Packets
1 = the switch discards packets whose VID does not match the ingress port default
VID.
0 = no packets are discarded.
Force Flow Control
1 = always enable flow control on the port, regardless of AN result.
0 = the flow control is enabled based on AN result.
Back Pressure Enable
1 = enable port’s half-duplex back pressure.
0 = disable port’s half-duplex back pressure.
Transmit Enable
1 = enable packet transmission on the port.
0 = disable packet transmission on the port.
Receive Enable
1 = enable packet reception on the port.
0 = disable packet reception on the port.
Learning Disable
1 = disable switch address learning capability.
0 = enable switch address learning.
Sniffer Port
1 = port is designated as a sniffer port and transmits packets that are monitored.
0 = port is a normal port.
Receive Sniff
1 = all packets received on the port are marked as “monitored packets” and forwarded
to the designated “sniffer port.”
0 = no receive monitoring.
Transmit Sniff
1 = all packets transmitted on the port are marked as “monitored packets” and
forwarded to the designated “sniffer port.”
0 = no transmit monitoring.
Reserved
User Priority Ceiling
1 = if the packet’s “priority field” is greater than the “user priority field” in the port VID
control register bit[15:13], replace the packet’s “priority field” with the “user priority
field” in the port VID control register bit[15:13].
0 = do no compare and replace the packet’s “priority field.”
Port VLAN Membership
Define the port’s Port VLAN membership. Bit 2 stands for the host port, bit 1 for port 2,
and bit 0 for port 1. The port can only communicate within the membership. A ‘1’
includes a port in the membership; a ‘0’ excludes a port from the membership.
100
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9