KSZ8842-16MVL Micrel Inc, KSZ8842-16MVL Datasheet - Page 99

• Manufacturer Part Number: KSZ8842-16MVL
• Description: 2-Port Ethernet Switch/Repeater + Generic (8, 16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MVL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1635 - BOARD EVALUATION KSZ8842-16MVL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-2119; KSZ8842-16MVL

Bank 48 Port 1 Control Register 1 (0x00): P1CR1
This register contains the global per port control for the switch function.
Micrel, Inc.
Bit
15-8
7
6
5
4-3
2
1
0
October 2007
Default
0x00
0
0
0
0x0
0
0
0
R/W
RO
RW
RW
RW
RW
RW
RW
RW
Description
Reserved
Broadcast Storm Protection Enable
1 = enable broadcast storm protection for ingress packets on the port.
0 = disable broadcast storm protection.
Diffserv Priority Classification Enable
1= enable DiffServ priority classification for ingress packets on the port.
0 = disable DiffServ function.
802.1p Priority Classification Enable
1= enable 802.1p priority classification for ingress packets on the port.
0 = disable 802.1p.
Port-Based Priority Classification
00 - ingress packets on port are classified as priority 0 queue if “DiffServ” or “802.1p”
classification is not enabled or fails to classify.
01 - ingress packets on port are classified as priority 1 queue if “DiffServ” or “802.1p”
classification is not enabled or fails to classify.
10 - ingress packets on port are classified as priority 2 queue if “DiffServ” or “802.1p”
classification is not enabled or fails to classify.
11 - ingress packets on port are classified as priority 3 queue if “Diffserv” or “802.1p”
classification is not enabled or fails to classify.
Note: “DiffServ”, “802.1p” and port priority can be enabled at the same time. The OR’ed
result of 802.1p and DSCP overwrites the port priority.
Tag Insertion
1 = when packets are output on the port, the switch adds 802.1p/q tags to packets
without 802.1p/q tags when received. The switch will not add tags to packets already
tagged. The tag inserted is the ingress port’s “port VID”.
0 = disable tag insertion.
Tag Removal
1 = when packets are output on the port, the switch removes 802.1p/q tags from packets
with 802.1p/q tags when received. The switch will not modify packets received without
tags.
0 = disable tag removal.
TX Multiple Queues Select Enable
1 = the port output queue is split into four priority queues.
0 = single output queue on the port. There is no priority differentiation even though
packets are classified into high or low priority.
99
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9