KSZ8842-16MVL Micrel Inc, KSZ8842-16MVL Datasheet - Page 68

• Manufacturer Part Number: KSZ8842-16MVL
• Description: 2-Port Ethernet Switch/Repeater + Generic (8, 16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MVL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1635 - BOARD EVALUATION KSZ8842-16MVL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-2119; KSZ8842-16MVL

Bank 17 RX Frame Data Pointer Register (0x06): RXFDPR
The value of this register determines the address to be accessed within the RXQ frame buffer. When the Auto Increment
is set, it will automatically increment the RXQ Pointer on read accesses to the data register.
The counter is incremented is by one for every byte access, by two for every word access, and by four for every double
word access.
Bank 17 QMU Data Register Low (0x08): QDRL
This register QDRL(0x08-0x09) contains the Low data word presently addressed by the pointer register. Reading maps
from the RXQ, and writing maps to the TXQ.
Bank 17 QMU Data Register High (0x0A): QDRH
This register QDRH(0x0A-0x0B) contains the High data word presently addressed by the pointer register. Reading maps
from the RXQ, and writing maps to the TXQ.
Micrel, Inc.
Bit
15
14
13-11
10-0
Bit
15-0
Bit
15-0
October 2007
Default Value
-
0x0
-
Default Value
-
Default Value
-
0x0
R/W
RO
RW
RO
RW
R/W
RW
R/W
RW
Description
Reserved
RXFPAI RX Frame Pointer Auto Increment
When this bit is set, the RXQ Address register increments automatically on accesses
to the data register. The increment is by one for every byte access, by two for every
word access, and by four for every double word access.
When this bit is reset, the RX frame data pointer is manually controlled by user to
access the RX frame location.
Reserved
RXFP RX Frame Pointer
RX Frame data pointer index to the Data register for access.
This field reset to next available RX frame location when RX Frame release command
is issued (through the RXQ command register).
Description
QDRL Queue Data Register Low
This register is mapped into two uni-directional buffers for 16-bit buses, and one uni-
directional buffer for 32-bit buses, (TXQ when Write, RXQ when Read) that allow
moving words to and from the KSZ8842M regardless of whether the pointer is even,
odd, or Dword aligned. Byte, word, and Dword access can be mixed on the fly in any
order. This register along with DQRH is mapped into two consecutive word locations
for 16-bit buses, or one word location for 32-bit buses, to facilitate Dword move
operations.
Description
QDRL Queue Data Register High
This register is mapped into two uni-directional buffers for 16-bit buses, and one uni-
directional buffer for 32-bit buses, (TXQ when Write, RXQ when Read) that allow
moving words to and from the KSZ8842M regardless of whether the pointer is even,
odd, or dword aligned. Byte, word, and Dword access can be mixed on the fly in any
order. This register along with DQRL is mapped into two consecutive word locations
for 16-bit buses, or one word location for 32-bit buses, to facilitate Dword move
operations.
68
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9