KSZ8842-16MVL Micrel Inc, KSZ8842-16MVL Datasheet - Page 51

• Manufacturer Part Number: KSZ8842-16MVL
• Description: 2-Port Ethernet Switch/Repeater + Generic (8, 16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MVL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1635 - BOARD EVALUATION KSZ8842-16MVL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-2119; KSZ8842-16MVL

CPU Interface I/O Registers
The KSZ8842M provides an EISA-like, ISA-like, or VLBUS-like bus interface for the CPU to access its internal I/O
registers. I/O registers serve as the address that the microprocessor uses when communicating with the device. This is
used for configuring operational settings, reading or writing control, status information, and transferring packets by reading
and writing through the packet data registers.
I/O Registers
Input/Output (I/O) registers are limited to 16 locations as required by most ISA bus-based systems; therefore, registers
are assigned to different banks. The last word of the I/O register locations (0xE - 0xF) is shared by all banks and can be
used to change the bank in use.
The following I/O Space Mapping Tables apply to 8, 16 or 32-bit bus products. Depending upon the bus interface used
and byte enable signals (BE[3:0]N control byte access), each I/O access can be performed as an 8-bit, 16-bit, or 32-bit
operation. (The KSZ8842M is not limited to 8/16-bit performance and 32-bit read/write are also supported).
Micrel, Inc.
October 2007
51
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9