1-1532127-9 Tyco Electronics, 1-1532127-9 Datasheet - Page 50

• Manufacturer Part Number: 1-1532127-9
• Description: Conn Microminiature D SKT 21 POS Solder ST Thru-Hole 21 Terminal 1 Port
• Manufacturer: Tyco Electronics
• Type: Microminiature Dr

Specifications of 1-1532127-9

• Gender: SKT
• Termination Method: Solder
• Mounting: Through Hole
• Body Orientation: Straight

46
JACKMATE Technical & Performance Data for Plastic Shell
Electrical
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m]
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MIL-STD-
202C, Method 101B, Condition B) —
Both mated and unmated samples do not
10 & 14 Contact Layout
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
[14.00]
.570
[4.19]
.165
[7.24]
.285
14 Layout
[1.91]
.075
30
[1.27]
.050
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Typ.
Rectangular Connectors
JACKMATE MCJ(M) Series Plastic (Metal) Shell Center Jackscrew Connectors
JACKMATE Connectors are
the first Twist Pin contact
assemblies designed to
accommodate center
jackscrews that provide
jacking action when mating
or unmating the connectors.
Although the units were
initially developed for high
density cord-to-cord or
in-line applications, either
plug or receptacle can be
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors
exceed the maximum allowable contact
resistance (8 milliohms) when subjected
to the 48 hour salt spray test.
Durability — The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity — No. 24 contact 3 amperes.
It must be recognized, however, that all
the wires to a connector will not carry
their maximum current under all
environmental conditions due to wire
temperature.
[11.94]
.470
[4.19]
.165
[5.97]
.235
10 Layout
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
[1.91]
.075
[1.27]
30
.050
Typ.
adapted to a PC board. The
jacking hardware consist of
a threaded bushing and a
captivated jackscrew which
are made of corrosion
resistant stainless steel
and are molded into the
JACKMATE Connector
Insulator.
The twist pin contacts are
on .050 [1.27] center-to-
Mechanical
Contact Engaging & Separation
Forces — 8.0 oz. max. [2.22N] (eng.),
0.5 oz. min. [.14N] (sep.).
Environmental
Temperature Range (Operating) —
-67°F to 257°F [-55° C to 125°C].
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) — No
discontinuity in excess of 1 µ sec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
G forces, whichever is less.
[3.05]
.120
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Receptacle
Bushing
Guide Pin
2 Plcs.
center linear spacing and
contact terminations are
available in solid wire or
stranded wire. There is a
high degree of flexibility
with this JACKMATE con-
nector design for commer-
cial or military applications.
Available om MCJ(M) Series
Plastic (Metal) Shells.
Materials
Insulator — Glass filled Nylon Type 6.
Contacts — Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Hardware — Corrosive resistant stain-
less steel.
Finishes
Contacts — Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware — Passivated Per QQ-P-35.
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
[7.62]
.300
Plug
Jackscrew
(.050 hex wrench
req'd to turn screw)