PIC12HV609T-I/MS Microchip Technology, PIC12HV609T-I/MS Datasheet - Page 112

• Manufacturer Part Number: PIC12HV609T-I/MS
• Description: 1.75KB Flash, 64B RAM, 6 I/O, 8MHz Internal Oscillator 8 MSOP 3x3mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 12Fr

Specifications of PIC12HV609T-I/MS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 5
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: FLASH
• Ram Size: 64 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Processor Series: PIC12H
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Interface Type: RS- 232 , USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC12HV609T-I/MSTR

PIC12F609/615/617/12HV609/615
12.3.4
The BOREN0 and BOREN1 bits in the Configuration
Word register select one of three BOR modes. One
mode has been added to allow control of the BOR
enable for lower current during Sleep. By selecting
BOREN<1:0> = 10, the BOR is automatically disabled
in Sleep to conserve power and enabled on wake-up.
See
definition.
A brown-out occurs when V
greater than parameter T
“Electrical Specifications”). The brown-out condition
will reset the device. This will occur regardless of V
slew rate. A Brown-out Reset may not occur if V
below V
FIGURE 12-3:
DS41302D-page 112
Register 12-1
Note 1: 64 ms delay only if PWRTE bit is programmed to ‘0’.
BOR
BROWN-OUT RESET (BOR)
for less than parameter T
Internal
Internal
Internal
Reset
Reset
Reset
V
V
V
DD
DD
DD
for
BROWN-OUT SITUATIONS
the
BOR
DD
Configuration
falls below V
(see Section 16.0
BOR
.
BOR
DD
Word
falls
for
DD
< 64 ms
64 ms
On any Reset (Power-on, Brown-out Reset, Watchdog
timer, etc.), the chip will remain in Reset until V
above V
up Timer will be invoked by the Reset and keep the chip
in Reset an additional 64 ms.
If V
running, the chip will go back into a Brown-out Reset
and the Power-up Timer will be re-initialized. Once V
rises above V
64 ms Reset.
(1)
Note:
64 ms
64 ms
DD
drops below V
BOR
(1)
(1)
The Power-up Timer is enabled by the
PWRTE bit in the Configuration Word
register.
(see Figure 12-3). If enabled, the Power-
BOR
, the Power-up Timer will execute a
BOR
 2010 Microchip Technology Inc.
while the Power-up Timer is
V
V
V
BOR
BOR
BOR
DD
rises
DD