PIC16LF1518-E/SS Microchip Technology, PIC16LF1518-E/SS Datasheet - Page 134

• Manufacturer Part Number: PIC16LF1518-E/SS
• Description: 28-pin, 28KB Flash, 1024B RAM, 10-bit ADC, 2xCCP, SPI, MI2C, EUSART, 1.8V-3.6V 2
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1518-E/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 28KB (16K x 14)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 17x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: *
• Processor Series: PIC16LF151x
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16(L)F1516/7/8/9
13.6
REGISTER 13-1:
REGISTER 13-2:
REGISTER 13-3:
DS41452A-page 134
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
IOCBN7
R/W-0/0
IOCBP7
R/W-0/0
R/W-0/0
IOCBF7
Interrupt-On-Change Registers
IOCBP<7:0>: Interrupt-on-Change PORTB Positive Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a positive going edge. Associated Status bit and interrupt
0 = Interrupt-on-Change disabled for the associated pin.
IOCBN<7:0>: Interrupt-on-Change PORTB Negative Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a negative going edge. Associated Status bit and interrupt
0 = Interrupt-on-Change disabled for the associated pin.
IOCBF7:0>: Interrupt-on-Change PORTB Flag bits
1 = An enabled change was detected on the associated pin.
0 = No change was detected, or the user cleared the detected change.
IOCBN6
R/W-0/0
IOCBP6
R/W-0/0
R/W-0/0
IOCBF6
Set when IOCBPx = 1 and a rising edge was detected on RBx, or when IOCBNx = 1 and a falling edge
was detected on RBx.
flag will be set upon detecting an edge.
flag will be set upon detecting an edge.
IOCBP: INTERRUPT-ON-CHANGE PORTB POSITIVE EDGE REGISTER
IOCBN: INTERRUPT-ON-CHANGE PORTB NEGATIVE EDGE REGISTER
IOCBF: INTERRUPT-ON-CHANGE PORTB FLAG REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W/HS-0/0
R/W-0/0
IOCBP5
R/W-0/0
IOCBN5
IOCBF5
R/W/HS-0/0
IOCBN4
R/W-0/0
IOCBP4
R/W-0/0
IOCBF4
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
HS - Bit is set in hardware
R/W/HS-0/0
R/W-0/0
IOCBP3
R/W-0/0
IOCBN3
IOCBF3
R/W/HS-0/0
R/W-0/0
IOCBP2
R/W-0/0
IOCBN2
IOCBF2
 2010 Microchip Technology Inc.
R/W/HS-0/0
R/W-0/0
IOCBP1
R/W-0/0
IOCBN1
IOCBF1
R/W/HS-0/0
IOCBN0
R/W-0/0
IOCBP0
R/W-0/0
IOCBF0
bit 0
bit 0
bit 0