PIC16LF1518-E/SS Microchip Technology, PIC16LF1518-E/SS Datasheet - Page 48

• Manufacturer Part Number: PIC16LF1518-E/SS
• Description: 28-pin, 28KB Flash, 1024B RAM, 10-bit ADC, 2xCCP, SPI, MI2C, EUSART, 1.8V-3.6V 2
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1518-E/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 28KB (16K x 14)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 17x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: *
• Processor Series: PIC16LF151x
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16(L)F1516/7/8/9
REGISTER 4-2:
DS41452A-page 48
bit 7
Legend:
R = Readable bit
‘0’ = Bit is cleared
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8-5
bit 4
bit 3-2
bit 1-0
Note 1:
U-1
—
PIC16F151X only.
LVP: Low-Voltage Programming Enable bit
1 = Low-voltage programming enabled
0 = High-voltage on MCLR must be used for programming
DEBUG: In-Circuit Debugger Mode bit
1 = In-Circuit Debugger disabled, ICSPCLK and ICSPDAT are general purpose I/O pins
0 = In-Circuit Debugger enabled, ICSPCLK and ICSPDAT are dedicated to the debugger
ULPBOR: Ultra Low-Power BOR
1 = Ultra Low-Power BOR is disabled
0 = Ultra Low-Power BOR is enabled
BORV: Brown-out Reset Voltage Selection bit
1 = Brown-out Reset voltage set to 1.9V (typical)
0 = Brown-out Reset voltage set to 2.7V (typical)
STVREN: Stack Overflow/Underflow Reset Enable bit
1 = Stack Overflow or Underflow will cause a Reset
0 = Stack Overflow or Underflow will not cause a Reset
Unimplemented: Read as ‘1’
VCAPEN: Voltage Regulator Capacitor Enable bits
If PIC16LF151X (regulator disabled):
If PIC16F151X (regulator enabled):
Unimplemented: Read as ‘1’
WRT<1:0>: Flash Memory Self-Write Protection bits
8 kW Flash memory (PIC16(L)F1516/7 only):
16 kW Flash memory (PIC16(L)F1518/9 only):
These bits are ignored. All V
0 = V
1 = All V
11 = Write protection off
10 = 000h to 1FFh write-protected, 200h to 1FFFh may be modified by PMCON control
01 = 000h to FFFh write-protected, 1000h to 1FFFh may be modified by PMCON control
00 = 000h to 1FFFh write-protected, no addresses may be modified by PMCON control
11 = Write protection off
10 = 000h to 1FFh write-protected, 200h to 3FFFh may be modified by PMCON control
01 = 000h to 1FFFh write-protected, 2000h to 3FFFh may be modified by PMCON control
00 = 000h to 3FFFh write-protected, no addresses may be modified by PMCON control
U-1
—
CONFIGURATION WORD 2
CAP
CAP
bit 13
P = Programmable bit
‘1’ = Bit is set
functionality is enabled on RA5
pin functions are disabled
R/P-1
LVP
U-1
—
VCAPEN
DEBUG
CAP
R/P-1
R/P-1
Preliminary
pin functions are disabled.
(1)
U = Unimplemented bit, read as ‘1’
-n = Value when blank or after Bulk Erase
ULPBOR
R/P-1
U-1
—
(1)
BORV
R/P-1
U-1
—
 2010 Microchip Technology Inc.
STVREN
R/P-1
R/P-1
WRT<1:0>
R/P-1
U-1
—
bit 8
bit 0