171662-1 TE Connectivity, 171662-1 Datasheet - Page 26

• Manufacturer Part Number: 171662-1
• Description: E-J MK-2 070 REC CONT
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: 070r

Specifications of 171662-1

• Gender: RCP
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -30C to 105C
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.6mm
• Product Depth (mm): 5.4mm
• Product Length (mm): 16.5mm
• Product Line: Econoseal J
• Product Type: Contact
• Wire/cable Type: Discrete Wire
• Cable Type: Thin Wall
• Termination Method To Wire/cable: Crimp
• Wire/cable Size (awg): 16 – 20
• Wire/cable Size (mm²): 0.5 – 1.25
• Wire Type: Stranded
• Contact Type: Socket
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.00 – 2.60 [0.079 – 0.102]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Power
• Packaging Method: Reel
• Packaging Quantity: 6000
• Lead Free Status / RoHS Status: Compliant

26
AMP Sealed Connectors
A
Contacts
Wire Seals
Connector Housings
Receptacle contacts are
pre-tin plated phosphor
bronze.
Designed to mate with
1.5 mm [.059 in.] wide x
0.8 mm [.031 in.] thick tab
contacts.
Lanceless contact design to
reduce contact tangling.
Wire range 0.5 - 1.0 mm
[#20 - #18] AWG.
Silicon rubber material.
For insulation diameters of
1.4 - 2.1 mm [.055 - .083 in.].
Loose piece wire seals are
crimped simultaneously
with the contacts.
Available only as a plug
connector. The tab contact
must be molded into the
customer’s device. Interface
requirements can be
provided upon request.
Housings and secondary
locks produced from glass
filled, 66 nylon.
Single row connector
configuration.
Integral (factory installed)
secondary locks.
Available in 2, 3, and 4,
position versions.
AMP Technical Support Center/AMP FAX Service
1-800-522-6752 717-986-7777
2
AMP Sealed Connectors
Superseal Connectors . . . For Wire To Device Applications . . . 3.5 mm Centers
These connectors were
originally designed to mate
with a Packard, Metri-Pack™
150 Series interface for fuel
injection applications.
Similar in design to the
Superseal 1.5 Series
product family, this
connector offers the same
basic features except the
contacts are located on a
3.5 [0.138] centerline in-
stead of the 6.0 [.236] pitch
found used on the 1.5
Series Connector.
Currently available only in a
plug connector version, this
connector requires the tab
contacts be molded into the
mating device. Interface
requirements can be
provided for the mating
connection.
Waterproof protection is
provided by individual wire
seals which are inserted
over the wire then crimped
simultaneously with the
insulation barrel of the
receptacle contact.
The connector housing
Incorporates a pre-
assembled secondary lock
to help insure correct and
complete contact insertion
into the housing and helps
prevent contact back out
during connector mating.
Dimensions are in
millimeters over [inches]
www.amp.com
Product Performance
Temperature Rating
-30 o to 105 o C. (including temperature
rise due to current load).
Contact Termination Resistance
3 m Max (Initial)
Dielectric Withstanding Voltage
1.0 kVAC between adjacent contacts.
Current Guidelines
See page 4 of product specification
108-37021.
Product Documentation
Product Specification
108-37021
Specifications
subject to change.
Revised 01-00
Catalog
65481