LTC1403ACMSE Linear Technology, LTC1403ACMSE Datasheet - Page 16

• Manufacturer Part Number: LTC1403ACMSE
• Description: IC ADC 14BIT 2.8MSPS DIFF 10MSOP
• Manufacturer: Linear Technology

Specifications of LTC1403ACMSE

• Number Of Bits: 14
• Sampling Rate (per Second): 2.8M
• Data Interface: Serial, SPI™
• Number Of Converters: 1
• Power Dissipation (max): 12mW
• Voltage Supply Source: Single Supply
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

LTC1403/LTC1403A
APPLICATIONS INFORMATION
;
bsend
;
;======================================================================
;
;
;
;======================================================================
**********************************************************************
*
**********************************************************************
*
* File: s2k14ini.ASM
*
*
*
**********************************************************************
ON
OFF
YES
NO
BIT_8
BIT_10
BIT_12
BIT_16
GO
**********************************************************************
* This is an example of how to initialize the Buffered Serial Port (BSP).
* The BSP is initialized to require an external CLK and FSX for
* operation. The data format is 16-bits, burst mode, with autobuffering
* enabled.
*
*****************************************************************************************************
*LTC1403 timing from LCC28 socket board with 10MHz crystal.
*10MHz, divided from 40MHz, forced to CLKIN by 1403 board.
*Horizontal scale is 25ns/chr or 100ns period at BCLKR
*Timing measured at DSP pins. Jxx pin labels for jumper cable.
*BFSR
*BCLKR Pin J1-14 _/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~\_/~*
*BDR
*CLKIN Pin J5-09 ~~~~~\_______/~~~~~~~\_______/~~~~~~~\_______/~~~~~~~\_______/~~~~~~~\_______/~~~~~*
*C542 read
*
16
VECTORS
----------------------- end ISR ----------------------------
Pin J1-20 ~~\____/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\____/~~~~~~~~~~~*
Pin J1-26 _---_---_---<B13-B12-B11-B10-B09-B08-B07-B06-B05-B04-B03-B02-B01-B00>---_---<B13-B12*
-------------------dummy bsend return------------------------
return_enable
.copy “c:\dskplus\1403\s2k14ini.asm”
.space 16*32
.sect “vectors”
.copy “c:\dskplus\1403\bvectors.asm”
.sect “buffer”
.space 16*0x800
.sect “result”
.space 16*0x800
.end
(C) COPYRIGHT TEXAS INSTRUMENTS, INC. 1996
for use with 1403A in standard mode
BSPC and SPC are the same in the ‘C542
BSPCE and SPCE seem the same in the ‘C542
.title “Buffered Serial Port Initialization Routine”
.set 1
.set !ON
.set 1
.set !YES
.set 2
.set 1
.set 3
.set 0
.set 0x80
BSP initialization code for the ‘C54x DSKplus
0
B13 B12 B11 B10 B09 B08 B07 B06 B05 B04 B03 B02 B01 B00
;this is also a dummy return to defi ne bsend
;in vector table fi le BVECTORS.ASM
;clear a chunk at the end to mark the end
;Set address of BSP buffer for clearing
;Set address of result for clearing
;The vectors start here
;initialize buffered serial port
;get BSP vectors
*
*
*
*
*
*
0
0
B13 B12*
*
*
*
*
*
1403fb