AD5173BRM2.5-RL7 Analog Devices Inc, AD5173BRM2.5-RL7 Datasheet - Page 18

• Manufacturer Part Number: AD5173BRM2.5-RL7
• Description: IC DGTL POT DUAL 2.5K OTP 10MSOP
• Manufacturer: Analog Devices Inc

Specifications of AD5173BRM2.5-RL7

• Rohs Status: RoHS non-compliant
• Taps: 256
• Resistance (ohms): 2.5K
• Number Of Circuits: 2
• Temperature Coefficient: 35 ppm/°C Typical
• Memory Type: Non-Volatile
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 10-MSOP, Micro10™, 10-uMAX, 10-uSOP
• Resistance In Ohms: 2.5K
• Number Of Elements: 2
• # Of Taps: 256
• Resistance (max): 2.5KOhm
• Power Supply Requirement: Single
• Interface Type: Serial (2-Wire/I2C)
• Single Supply Voltage (typ): 3/5V
• Dual Supply Voltage (typ): Not RequiredV
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 10
• Lead Free Status / RoHS Status: Not Compliant

AD5172/AD5173
LAYOUT CONSIDERATIONS
In PCB layout, it is a good practice to employ compact, minimum
V
V
DD
DD
+
C1
C2
lead length design. The leads to the inputs should be as direct as
10µF
0.1µF
AD5172
possible with a minimum conductor length. Ground paths should
have low resistance and low inductance.
Note that the digital ground should also be joined remotely to
GND
the analog ground at one point to minimize the ground bounce.
Figure 47. Power Supply Bypassing
Rev. H | Page 18 of 24