0W633-001-XTP ON Semiconductor, 0W633-001-XTP Datasheet - Page 26

• Manufacturer Part Number: 0W633-001-XTP
• Description: IC AUDIO PROCESSOR AD/DA 57LFBGA
• Manufacturer: ON Semiconductor
• Series: BelaSigna® 250r
• Type: Floating Pointr

Specifications of 0W633-001-XTP

• Interface: I²C, I²S, PCM, SPI, UART
• Clock Rate: 50MHz
• On-chip Ram: 42kB
• Voltage - I/o: 1.0V, 2.0V
• Voltage - Core: 1.00V, 2.00V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 57-LFBGA
• Package: 57CABGA
• Numeric And Arithmetic Format: Fixed-Point
• Ram Size: 16 KB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Non-volatile Memory: -

•
•
Assembly Information
Carrier Details
7 x 7 mm LFBGA
BelaSigna 250 LFBGA packages. The packing consists of
a pocketed carrier tape, a cover tape, and a molded
1. Measured from the centerline of sprocket hole to centerline of the pocket hole and from the centerline of sprocket hole to centerline
2. Cumulative tolerance of 10 sprocket holes is ±0.20.
3. This thickness is applicable as measured at the edge of the tape.
4. Material: conductive polystyrene.
5. Dimensions in mm.
6. Allowable camber to be 1 mm per 100 mm in length, non−cumulative over 250 mm.
7. Unless otherwise specified, tolerance ±0.10.
8. Measurement point to be 0.3 from bottom pocket.
9. Surface resistivity less than or equal to 1.0X10E9 W
ON Semiconductor offers tape and reel packing for
for boot, the designer can choose to connect the SPI_CS
pin to the EEPROM or use a GPIO (high at boot) for a
design with several daisy−chained SPI devices.
PCM interface for high−bandwidth digital audio I/O.
This interface comes with configurable input and output
buffers for reduced interrupt handling overhead when
BelaSigna 250 is used in an audio streaming application.
Configurable high−speed RS−232 universal
asynchronous receiver/transmitter (UART).
of the pocket.
Quantity per Reel: 1500 units
Pin 1 Orientation: Upper Left
Each complete reel contains 1500 parts.
Brand: PEAK
P/N: CP3−BG0707−16−12.0B4
Figure 11. Package Orientation on Tape
Figure 12. Carrier Tape Drawing
2
.
http://onsemi.com
A = 13 inches
B = 16 mm
C = 4 inches
D = 14 mm
26
•
•
anti−static polystyrene reel. The carrier and cover tape
create an ESD safe environment, protecting the components
from physical and electrostatic damage during shipping and
handling.
RS−232−based communications port for debugging and
in−circuit emulation. This interface can also be used to
send analog audio data to the input stage.
Two−wire synchronous serial (TWSS) interface
compatible with the I
100 kbps at 1.28 MHz MCLK and up to 400 kbps at
MCLKs higher than 1.92 MHz. Supports master and
slave operation.
2
C protocol and with speeds up to