EP1C3T144A8N Altera, EP1C3T144A8N Datasheet - Page 44

• Manufacturer Part Number: EP1C3T144A8N
• Description: IC CYCLONE FPGA 2910 LE 144-TQFP
• Manufacturer: Altera
• Series: Cyclone®r

Specifications of EP1C3T144A8N

• Number Of Logic Elements/cells: 2910
• Number Of Labs/clbs: 291
• Total Ram Bits: 59904
• Number Of I /o: 104
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -

7–2
Quartus II Software Support
Power Analysis and Estimation
PowerPlay Early Power Estimator
The Automotive-Grade Device Handbook
f
1
The Altera
automotive temperature range. The Quartus II software provides a comprehensive
environment for system-on-a-programmable-chip (SOPC) design. It also includes
hardware description language (HDL) and schematic design entry, compilation and
logic synthesis, full simulation and advanced timing analysis, SignalTap
analyzer, and device configuration.
For more information about using the Quartus II software for the HardCopy II
development flow and settings, refer to the
chapter in volume 1 of the HardCopy Series Handbook.
To target an automotive-grade HardCopy II device in your design, perform the
following steps in the Quartus II software:
1. On the Assignments menu, click Device. The Settings dialog box appears.
2. In the Family drop-down list, select HardCopy II.
3. Under Target device, select Specific device selected in ‘Available devices’ list.
4. In the Available devices list, select the appropriate ordering code, as shown in
5. Click OK.
Support for the automotive-grade HardCopy II devices is only available in the
Quartus II software version 7.2 SP1 and later.
Altera provides the following power analysis and estimation tools for your design:
■
■
The PowerPlay Early Power Estimator (EPE) is a power estimation tool that helps you
estimate the power consumption of your design during the system planning phase for
proper power supply planning and consideration. The EPE allows you to enter design
information based on architectural features and calculates the power consumed by
each architectural feature. Inputs to the EPE are environmental conditions and device
resources (such as clock frequency) that you expect to use in your design. The EPE
then calculates the static and dynamic power, current estimates, and thermal analysis
for the design.
You can either enter the design information manually into the spreadsheet or import a
power estimator file of a fully or partially completed design from the Quartus II
software. After importing a file, you can edit some of the input parameters including
V
your system requirements.
CCINT
Table
“PowerPlay Early Power Estimator”
“PowerPlay Power Analyzer”
, ambient temperature, airflow, clock frequency, and toggle percentage to suit
7–1.
®
Quartus
®
II design software supports the HardCopy II devices in the
Quartus II Support for HardCopy II Devices
© March 2010 Altera Corporation
Chapter 7: HardCopy II Devices
Quartus II Software Support
®
II logic