XE8801AMI027LF Semtech, XE8801AMI027LF Datasheet - Page 120

• Manufacturer Part Number: XE8801AMI027LF
• Description: IC DAS 16BIT FLASH 8K MTP 44LQFP
• Manufacturer: Semtech

Specifications of XE8801AMI027LF

• Applications: Sensing Machine
• Core Processor: RISC
• Program Memory Type: FLASH (22 kB)
• Controller Series: XE8000
• Ram Size: 512 x 8
• Interface: UART, USRT
• Number Of I /o: 24
• Voltage - Supply: 2.4 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 44-LQFP
• For Use With: XE8000MP - PROG BOARD AND PROSTART2 CARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CounterA and CounterB are 8-bit counters and can be combined to form a 16-bit counter. CounterC and CounterD
exhibit the same features.
The counters can also be used to generate two PWM outputs on PB[0] and PB[1]. In PWM mode one can generate
PWM functions with 8, 10, 12, 14 or 16 bit wide counters.
The counters A and B can be captured by events on an internal or an external signal. The capture can be
performed on both 8-bit counters running individually on two different clock sources or on both counters chained to
form a 16-bit counter. In any case, the same capture signal is used for both counters.
When the counters A and B are not chained, they can be used in several configurations: A and B as counters, A
and B as captured counters, A as PWM and B as counter, A as PWM and B as captured counter.
When the counters C and D are not chained, they can be used either both as counters or counter C as PWM and
counter D as counter.
Note: When writing to RegCntA or RegCntB, the processor writes the counter comparison values. When reading
these locations, the processor reads back either the actual counter value or the last captured value if the capture
mode is active.
© Semtech 2005
18.1 Features
18.2 Overview
18.3 Register map
•
•
•
•
•
•
•
•
•
•
4 x 8-bits timer/counter modules or 2 x 16-bits timers/counter modules
Each with 4 possible clock sources
Up/down counter modes
Interrupt and event generation
Capture function (internal or external source)
Rising, falling or both edge of capture signal
PA[3:0] can be used as clock inputs (debounced or direct)
2 x 8 bits PWM or 2 x 16 bits PWM
PWM resolution of 8, 10, 12, 14 or 16 bits
Complex mode combinations are possible between counter, capture and PWM modes
7-0
7-0
7-0
7-0
7-0
7-0
Bit
bit
bit
CounterA
CounterA
CounterB
CounterB
CounterC
CounterC
RegCntA
RegCntB
RegCntC
rw
rw
rw
w
w
w
r
r
r
Table 18-1. RegCntA
Table 18-2. RegCntB
Table 18-3. RegCntC
18-2
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
reset
reset
reset
8-bits comparison value
8-bits comparison value
8-bits comparison value
XE8801A – SX8801R
8-bits counter value
8-bits counter value
8-bits counter value
function
function
function
www.semtech.com