PIC24F08KA102-E/ML Microchip Technology Inc., PIC24F08KA102-E/ML Datasheet - Page 193

• Manufacturer Part Number: PIC24F08KA102-E/ML
• Description: 8KB FLASH, 1.5KB RAM, 512B EEPROM, 16 MIPS, 24 I/O, 16-BIT PIC24F FAMILY, NANOWAT
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24F08KA102-E/ML

• A/d Inputs: 9 Channel, 10-bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 24
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 28-pin QFN
• Programmable Memory: 8K Bytes
• Ram Size: 1.5K Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 3-16-bit
• Voltage, Range: 1.8-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part

REGISTER 26-4:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5
bit 4-3
bit 2
bit 1-0
FCKSM1
R/P-1
FCKSM<1:0>: Clock Switching and Monitor Selection Configuration bits
1x = Clock switching is disabled, Fail-Safe Clock Monitor is disabled
01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled
00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled
SOSCSEL: Secondary Oscillator Select Bit
1 = Secondary oscillator configured for high-power operation
0 = Secondary oscillator configured for low-power operation
POSCFREQ<1:0>: Primary Oscillator Frequency Range Configuration bits
11 = Primary oscillator/external clock input frequency greater than 8 MHz
10 = Primary oscillator/external clock input frequency between 100 kHz and 8 MHz
01 = Primary oscillator/external clock input frequency less than 100 kHz
00 = Reserved; do not use
OSCIOFNC: CLKO Enable Configuration bit
1 = CLKO output signal active on the OSCO pin; primary oscillator must be disabled or configured for
0 = CLKO output disabled
POSCMD<1:0>: Primary Oscillator Configuration bits
11 = Primary oscillator disabled
10 = HS oscillator mode selected
01 = XT oscillator mode selected
00 = External clock mode selected
FCKSM0
R/P-1
the External Clock mode (EC) for the CLKO to be active (POSCMD<1:0> = 11 or 00)
FOSC: OSCILLATOR CONFIGURATION REGISTER
P = Programmable bit
‘1’ = Bit is set
SOSCSEL POSCFREQ1 POSCFREQ0 OSCIOFNC
R/P-1
R/P-1
Preliminary
PIC24F16KA102 FAMILY
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/P-1
R/P-1
x = Bit is unknown
POSCMD1
R/P-1
DS39927B-page 191
POSCMD0
R/P-1
bit 0