STM32W108CBU63TR STMicroelectronics, STM32W108CBU63TR Datasheet - Page 157

• Manufacturer Part Number: STM32W108CBU63TR
• Description: 16/32-BITS MICROS
• Manufacturer: STMicroelectronics
• Series: STM32r

Specifications of STM32W108CBU63TR

• Applications: RF4CE, Remote Control
• Core Processor: ARM® Cortex-M3™
• Program Memory Type: FLASH (128 kB)
• Controller Series: STM32W
• Ram Size: 8K x 8
• Interface: I²C, SPI, UART/USART
• Number Of I /o: 24
• Voltage - Supply: 1.18 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-VFQFN Exposed Pad
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STM32W108CB, STM32W108HB
11
Note:
Analog-to-digital converter
The STM32W108 analog-to-digital converter (ADC) is a first-order sigma-delta converter
with the following features:
●
●
●
●
●
●
●
Figure 50
Figure 50. ADC block diagram
While the ADC Module supports both single-ended and differential inputs, the ADC input
stage always operates in differential mode. Single-ended conversions are performed by
connecting one of the differential inputs to VREF/2 while fully differential operation uses two
external inputs.
In high voltage mode, input buffers (with 0.25 gain only) may experience long term drift of its
input offset voltage that affects ADC accuracy. In these cases, only the 1.2V input range
mode of the ADC should be used. If measurement of signals >1.2V is required, then
external attenuation should be added.
Resolution of up to 12 bits
Sample times as fast as 5.33 µs (188 kHz)
Differential and single-ended conversions from six external and four internal sources
Two voltage ranges (differential): -VREF to +VREF, and –VDD_PADS to +VDD_PADS
Choice of internal or external VREF: internal VREF may be output
Digital offset and gain correction
Dedicated DMA channel with one-shot and continuous operating modes
shows the basic ADC structure.
Doc ID 16252 Rev 8
Analog-to-digital converter
157/209