PCA9672PW,118 NXP Semiconductors, PCA9672PW,118 Datasheet - Page 14

• Manufacturer Part Number: PCA9672PW,118
• Description: IC I/O EXPANDER I2C 8B 16TSSOP
• Manufacturer: NXP Semiconductors

Specifications of PCA9672PW,118

• Package / Case: 16-TSSOP
• Interface: I²C
• Number Of I /o: 8
• Interrupt Output: Yes
• Frequency - Clock: 1MHz
• Voltage - Supply: 2.3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Includes: POR
• Logic Family: PCA9672
• Number Of Lines (input / Output): 8.0 / 8.0
• Operating Supply Voltage: 2.3 V to 5.5 V
• Power Dissipation: 400 mW
• Operating Temperature Range: - 40 C to + 85 C
• Input Voltage: 5.5 V
• Logic Type: I/O Expander
• Maximum Clock Frequency: 1 MHz
• Mounting Style: SMD/SMT
• Number Of Input Lines: 8.0
• Number Of Output Lines: 8.0
• Output Current: 50 mA
• Output Voltage: 5.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935282747118; PCA9672PW-T; PCA9672PW-T

NXP Semiconductors
10. Application design-in information
PCA9672_2
Product data sheet
10.1 Bidirectional I/O expander applications
10.2 High current-drive load applications
In the 8-bit I/O expander application shown in
P7 are outputs. When used in this configuration, during a write, the input (P0 and P1)
must be written as HIGH so the external devices fully control the input ports. The desired
HIGH or LOW logic levels may be written to the I/Os used as outputs (P2 to P7). During a
read, the logic levels of the external devices driving the input ports (P0 and P1) and the
previous written logic level to the output ports (P2 to P7) will be read.
The GPIO also has an interrupt line (INT) that can be connected to the interrupt logic of
the microprocessor. By sending an interrupt signal on this line, the remote I/O informs the
microprocessor that there is incoming data or a change of data on its ports without having
to communicate via the I
The GPIO has a maximum sinking current of 25 mA per bit. In applications requiring
additional drive, two port pins in the same octal may be connected together to sink up to
50 mA current. Both bits must then always be turned on or off together. Up to 8 pins (one
octal) can be connected together to drive 200 mA.
Fig 19. Bidirectional I/O expander application
Fig 20. High current-drive load application
PROCESSOR
Remote 8-bit I/O expander for Fm+ I
CORE
PROCESSOR
CORE
Rev. 02 — 6 July 2007
2
C-bus.
V
DD
V
DD
SDA
SCL
INT
RESET
AD0
AD1
V
SDA
SCL
INT
RESET
AD0
AD1
DD
Figure
V
P0
P1
P2
P3
P4
P5
P6
P7
DD
19, P0 and P1 are inputs, and P2 to
P0
P1
P2
P3
P4
P5
P6
P7
temperature sensor
battery status
control for latch
control for switch
control for audio
control for camera
control for MP3
2
C-bus with interrupt and reset
002aac331
LOAD
V
DD
002aac330
PCA9672
© NXP B.V. 2007. All rights reserved.
V
DD
14 of 27