JS28F320C3BD70 Micron Technology Inc, JS28F320C3BD70 Datasheet - Page 21

• Manufacturer Part Number: JS28F320C3BD70
• Manufacturer: Micron Technology Inc

Specifications of JS28F320C3BD70

• Density: 32Mb
• Access Time (max): 70ns
• Interface Type: Parallel
• Boot Type: Bottom
• Address Bus: 21b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 16b
• Number Of Words: 2M
• Supply Current: 18mA
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / Rohs Status: Compliant

C3 Discrete
5.0
5.1
Warning:
.
5.2
Table 6:
March 2008
290645-24
NOTICE: Specifications are subject to change without notice. Verify with your local Numonyx Sales office that you have the
latest datasheet before finalizing a design.
Extended Operating Temperature
Storage Temperature
Voltage On Any Pin (except V
V
V
Output Short Circuit Current
Notes:
1.
2.
3.
4.
T
V
V
V
V
V
V
A
PP
CC
CC1
CC2
CCQ1
CCQ2
CCQ3
PP1
Symbol
During Read
During Block Erase and Program
Temperature under Bias
Voltage (for Block Erase and Program) with Respect to GND
and V
Minimum DC voltage is –0.5 V on input/output pins. During transitions, this level may undershoot to –2.0 V
for periods <20 ns. Maximum DC voltage on input/output pins is V
overshoot to V
Maximum DC voltage on V
V
maximum of 1000 cycles on the main blocks and 2500 cycles on the parameter blocks during program/
erase. V
Output shorted for no more than one second. No more than one output shorted at a time.
PP
CCQ
Program voltage is normally 1.65 V–3.6 V. Connection to a 11.4 V–12.6 V supply can be done for a
Supply Voltage with Respect to GND
Temperature and Voltage Operating Conditions
PP
Operating Temperature
V
I/O Supply Voltage
Supply Voltage
Maximum Ratings and Operating Conditions
Absolute Maximum Ratings
Stressing the device beyond the “Absolute Maximum Ratings” may cause permanent
damage. These ratings are stress ratings only. Operation beyond the “Operating
Conditions” is not recommended, and extended exposure beyond the “Operating
Conditions” may affect device reliability.
Operating Conditions
CC
may be connected to 12 V for a total of 80 hours maximum.
Supply Voltage
CC
+2.0 V for periods <20 ns.
CC
and V
Parameter
Parameter
PP
may overshoot to +14.0 V for periods <20 ns.
PP
) with Respect to GND
Notes
1, 2
1, 2
1
1
CC
+0.5 V which, during transitions, may
–40 °C to +85 °C
–40 °C to +85 °C
–40 °C to +85 °C
–65 °C to +125 °C
–0.5 V to +3.7 V
–0.5 V to +13.5 V
–0.2 V to +3.6 V
100 mA
1.65
1.65
Min
–40
2.7
3.0
2.7
1.8
Maximum Rating
Max
+85
3.6
3.6
3.6
2.5
2.5
3.6
Units
Volts
Volts
Volts
Datasheet
Notes
°C
1,2,3
1
4
21