A45L9332AE-6 AMIC Technology, Corp., A45L9332AE-6 Datasheet - Page 5

• Manufacturer Part Number: A45L9332AE-6
• Description: 256K x 32 Bit x 2 Banks Synchronous Graphic RAM
• Manufacturer: AMIC Technology, Corp.

Pin Descriptions
PRELIMINARY
CLK
CKE
A0~A9
A10(BA)
DQMi
DQi
DSF
VDD/VSS
VDDQ/VS
SQ
NC
RAS
CS
CAS
WE
Symbol
System Clock
Chip Select
Clock Enable
Address
Bank Select Address
Row Address Strobe
Column Address Strobe
Write Enable
Data Input/Output Mask
Data Input/Output
Define Special Function
Power Supply/Ground
Data Output
Power/Ground
No Connection
(October, 2001, Version 0.1)
Name
Active on the positive going edge to sample all inputs.
Disables or Enables device operation by masking or enabling all inputs except
CLK, CKE and DQMi
Masks system clock to freeze operation from the next clock cycle.
CKE should be enabled at least one clock + t ss prior to new command.
Disable input buffers for power down in standby.
Row / Column addresses are multiplexed on the same pins.
Row address : RA0~RA9, Column address: CA0~CA7
Selects bank to be activated during row address latch time.
Selects band for read/write during column address latch time.
Latches row addresses on the positive going edge of the CLK with RAS low.
Enables row access & precharge.
Latches column addresses on the positive going edge of the CLK with CAS low.
Enables column access.
Enables write operation and Row precharge.
Makes data output Hi-Z, t SHZ after the clock and masks the output.
Blocks data input when DQM active. (Byte Masking)
Data inputs/outputs are multiplexed on the same pins.
Enables write per bit, block write and special mode register set.
Power Supply: +3.3V 0.3V/Ground
Provide isolated Power/Ground to DQs for improved noise immunity.
4
Description
AMIC Technology, Inc.
A45L9332A Series