UMA1021M/C2 Philips Semiconductors (Acquired by NXP), UMA1021M/C2 Datasheet - Page 4

• Manufacturer Part Number: UMA1021M/C2
• Description: UDA1380; Stereo Audio Coder-decoder For MD, CD And MP3
• Manufacturer: Philips Semiconductors (Acquired by NXP)

Philips Semiconductors
1.5
2
This audio coder-decoder is suitable for home and
portable applications like MD, CD and MP3 players.
3
The UDA1380 is a stereo audio coder-decoder, available
in TSSOP32 (UDA1380TT) and HVQFN32 (UDA1380HN)
packages. All functions and features are identical for both
package versions. The term ‘UDA1380’ in this document
refers to both UDA1380TT and UDA1380HN, unless
particularly specified.
The front-end of the UDA1380 is equipped with a stereo
line input, which has a PGA control, and a mono
microphone input with an LNA and a VGA. The digital
decimation filter is equipped with an AGC which can be
used in case of voice-recording.
2003 Apr 04
DAC plus interpolator can run at either WSPLL
(regenerating the clock from WSI) or at SYSCLK
Separate digital logarithmic volume control for left and
right channels via L3-bus or I
steps of 0.25 dB
Digital tone control, bass boost and treble via L3-bus or
I
Digital de-emphasis for sample frequencies of:
32, 44.1, 48 and 96 kHz via L3-bus or I
Cosine roll-off soft mute function
Output signal polarity control via L3-bus or I
interface
Digital mixer for mixing ADC output signal and digital
serial input signal, if they run at the same sampling
frequency.
Stereo audio coder-decoder
for MD, CD and MP3
2
C-bus interface
APPLICATIONS
GENERAL DESCRIPTION
DAC features
2
C-bus from 0 to 78 dB in
2
C-bus interface
2
C-bus
4
The DAC part is equipped with a stereo line output and a
headphone driver output. The headphone driver is capable
of driving a 16
capable of driving a headphone without the need for
external DC decoupling capacitors, since the headphone
can be connected to a pin V
In addition, there is a built-in short-circuit protection for the
headphone driver output which, in case of short-circuit,
limits the current through the operational amplifiers and
signals the event via its L3-bus or I
The UDA1380 also supports an application mode in which
the coder-decoder itself is not running, but an analog
signal, for instance coming from an FM tuner, can be
controlled in gain and applied to the output via the
headphone driver and line outputs.
The UDA1380 supports the I
lengths of up to 24 bits, the MSB-justified data format with
word lengths of up to 24 bits and the LSB-justified serial
data format with word lengths of 16, 18, 20 or 24 bits
(LSB-justified 24 bits is only supported for the output
interface).
The UDA1380 has sound processing features in playback
mode, de-emphasis, volume, mute, bass boost and treble
which can be controlled by the L3-bus or I
load. The headphone driver is also
REF(HP)
2
S-bus data format with word
2
on the chip.
C-bus register.
Product specification
UDA1380
2
C-bus interface.