AN2104 Freescale Semiconductor, AN2104 Datasheet - Page 15

• Manufacturer Part Number: AN2104
• Description: Using Background Debug Mode
• Manufacturer: Freescale Semiconductor

AN2104
Breakpoints also can be set by selecting the line of code chosen for a
breakpoint, clicking the right mouse button, and selecting Toggle
Breakpoint at Cursor.
10. In the Execute drop down menu, select Reset Processor.
11. From this point, the code can be debugged by selecting Single
4. Apply +5 Vdc to P5 of the evaluation board.
5. Launch P&E’s WinIDE.
6. Open P&E’s sample code named SCI.
7. Assemble/compile this file. See
8. Launch the debugger. If the correction assistant window opens,
9. Verify that the correct S19 is loaded in the debugger by selecting
Freescale Semiconductor, Inc.
For More Information On This Product,
jumpers W3 and W4 are in the EVB positions and jumper W7 is in
the V
the FLASH is programmed as in the previous application example
in
select the correct parallel port being used. Defaults should work
for the other options in this window. See
the File drop down menu and selecting Load S19 File and the
SCI.S19 file.
step, Multiple step, or Go.
In-Circuit Programming of Internal
DD
Go to: www.freescale.com
position.
Background Debug Mode Application Examples
Figure
6. At this point, ensure that
FLASH.
Figure
8.
Application Note
15