mc9s08sh8mwjr Freescale Semiconductor, Inc, mc9s08sh8mwjr Datasheet - Page 171

• Manufacturer Part Number: mc9s08sh8mwjr
• Description: S08sh 5-volt 8-bit Microcontrollers With Sci, Spi, I2c, Adc And Analog Comparators
• Manufacturer: Freescale Semiconductor, Inc

11.1.2
Key features of the ICS module follow. For device specific information, refer to the ICS Characteristics in
the Electricals section of the documentation.
11.1.3
Figure 11-2
Freescale Semiconductor
•
•
•
•
•
•
•
Frequency-locked loop (FLL) is trimmable for accuracy
— 0.1% resolution using internal 32kHz reference and 9-bit TRIM:FTRIM
— 2% deviation over voltage and temperature using internal 32kHz reference
Internal or external reference clocks up to 5MHz can be used to control the FLL
— 3 bit select for reference divider is provided
Internal reference clock has 9 trim bits available
Internal or external reference clocks can be selected as the clock source for the MCU
Whichever clock is selected as the source can be divided down
— 2 bit select for clock divider is provided
Control signals for a low power oscillator as the external reference clock are provided
— HGO, RANGE, EREFS, ERCLKEN, EREFSTEN
FLL Engaged Internal mode is automatically selected out of reset
– Allowable dividers are: 1, 2, 4, 8
– BDC clock is provided as a constant divide by 2 of the DCO output
Features
Block Diagram
is the ICS block diagram.
MC9S08SH32 Series Data Sheet, Rev. 2
PRELIMINARY
Chapter 11 Internal Clock Source (S08ICSV2)
171