mc9s08sh8mwjr Freescale Semiconductor, Inc, mc9s08sh8mwjr Datasheet - Page 189

• Manufacturer Part Number: mc9s08sh8mwjr
• Description: S08sh 5-volt 8-bit Microcontrollers With Sci, Spi, I2c, Adc And Analog Comparators
• Manufacturer: Freescale Semiconductor, Inc

12.3.2
MTIMCLK contains the clock select bits (CLKS) and the prescaler select bits (PS).
Freescale Semiconductor
CLKS
Field
7:6
5:4
3:0
PS
Reset:
W
R
Unused register bits, always read 0.
Clock Source Select — These two read/write bits select one of four different clock sources as the input to the
MTIM prescaler. Changing the clock source while the counter is active does not clear the counter. The count
continues with the new clock source. Reset clears CLKS to 000.
00
01
10
11
All other encodings default to the bus clock (BUSCLK).
Clock Source Prescaler — These four read/write bits select one of nine outputs from the 8-bit prescaler.
Changing the prescaler value while the counter is active does not clear the counter. The count continues with the
new prescaler value. Reset clears PS to 0000.
0000 Encoding 0. MTIM clock source ÷ 1
0001 Encoding 1. MTIM clock source ÷ 2
0010 Encoding 2. MTIM clock source ÷ 4
0011 Encoding 3. MTIM clock source ÷ 8
0100 Encoding 4. MTIM clock source ÷ 16
0101 Encoding 5. MTIM clock source ÷ 32
0110 Encoding 6. MTIM clock source ÷ 64
0111 Encoding 7. MTIM clock source ÷ 128
1000 Encoding 8. MTIM clock source ÷ 256
All other encodings default to MTIM clock source ÷ 256.
MTIM Clock Configuration Register (MTIMCLK)
Encoding 0. Bus clock (BUSCLK)
Encoding 1. Fixed-frequency clock (XCLK)
Encoding 3. External source (TCLK pin), falling edge
Encoding 4. External source (TCLK pin), rising edge
7
0
0
Table 12-3. MTIM Clock Configuration Register Field Description
Figure 12-5. MTIM Clock Configuration Register
0
0
6
MC9S08SH32 Series Data Sheet, Rev. 2
0
5
CLKS
PRELIMINARY
0
4
Description
0
3
Chapter 12 Modulo Timer (S08MTIMV1)
0
2
PS
0
1
0
0
189