xr16m670 Exar Corporation, xr16m670 Datasheet - Page 10

no-image

xr16m670

Manufacturer Part Number
xr16m670
Description
1.62v To 3.63v High Performance Uart With 32-byte Fifo
Manufacturer
Exar Corporation
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
xr16m670IB25-F
Manufacturer:
Exar Corporation
Quantity:
10 000
Part Number:
xr16m670IB25TR-F
Manufacturer:
EXAR/艾科嘉
Quantity:
20 000
Part Number:
xr16m670IL32-F
Manufacturer:
EXAR
Quantity:
200
Part Number:
xr16m670IL32-F
Manufacturer:
EXAR/艾科嘉
Quantity:
20 000
XR16M670
1.62V TO 3.63V HIGH PERFORMANCE UART WITH 32-BYTE FIFO
REV. 1.0.0
2.6
Crystal Oscillator or External Clock Input
The M670 includes an on-chip oscillator to produce a clock for the baud rate generators in the device when a
crystal is connected between XTAL1 and XTAL2 as show below. The CPU data bus does not require this clock
for bus operation. The crystal oscillator provides a system clock to the Baud Rate Generators (BRGs) in the
UART. XTAL1 is the input to the oscillator or external clock buffer input with XTAL2 pin being the output. For
programming details, see
“Section 2.7, Programmable Baud Rate Generator with Fractional Divisor” on
page 11.
F
6. T
C
C
IGURE
YPICAL
RYSTAL
ONNECTIONS
XTAL1
XTAL2
R1
0-120
(Optional)
R2
500K - 1M
1.8432 MHz
Y1
to
24 MHz
C1
C2
22-47pF
22-47pF
The on-chip oscillator is designed to use an industry standard microprocessor crystal (parallel resonant,
fundamental frequency with 10-22 pF capacitance load, ESR of 20-120 ohms and 100ppm frequency
tolerance) connected externally between the XTAL1 and XTAL2 pins. Typical oscillator connections are shown
in
Figure
6. Alternatively, an external clock can be connected to the XTAL1 pin to clock the internal baud rate
generator for standard or custom rates. The BGA package has XTAL1 only, the external clock is required. For
further reading on oscillator circuit, see application note DAN108 on EXAR’s web site.
10

Related parts for xr16m670