xr16m670 Exar Corporation, xr16m670 Datasheet - Page 5

• Manufacturer Part Number: xr16m670
• Description: 1.62v To 3.63v High Performance Uart With 32-byte Fifo
• Manufacturer: Exar Corporation

XR16M670
1.62V TO 3.63V HIGH PERFORMANCE UART WITH 32-BYTE FIFO
REV. 1.0.0
1.0 PRODUCT DESCRIPTION
The XR16M670 (M670) is a high performance single channel UART. The configuration registers set is 16550
UART compatible for control, status and data transfer. Additionally, the M670 channel has 32 bytes of transmit
and receive FIFOs, Automatic RTS/CTS Hardware Flow Control, Automatic Xon/Xoff and Special Character
Software Flow Control, infrared encoder and decoder (IrDA ver 1.0 and 1.1), programmable fractional baud
rate generator with a prescaler of divide by 1 or 4, and data rate up to 16 Mbps. The XR16M670 can operate
from 1.62 to 3.63 volts. The M670 is fabricated with an advanced CMOS process.
Larger FIFO
The M670 provides a solution that supports 32 bytes of transmit and receive FIFO memory, instead of 16 bytes
in the XR16L580. The M670 is designed to work with high performance data communication systems, that
requires fast data processing time. Increased performance is realized in the M670 by the larger transmit and
receive FIFOs, FIFO trigger level control and automatic flow control mechanism. This allows the external
processor to handle more networking tasks within a given time. For example, the XR16L580 with a 16 byte
FIFO, unloads 16 bytes of receive data in 1.53 ms (This example uses a character length of 11 bits, including
start/stop bits at 115.2Kbps). This means the external CPU will have to service the receive FIFO at 1.53 ms
intervals. However with the 32 byte FIFO in the M670, the data buffer will not require unloading/loading for 6.1
ms. This increases the service interval giving the external CPU additional time for other applications and
reducing the overall UART interrupt servicing time. In addition, the selectable FIFO level trigger interrupt and
automatic hardware/software flow control is uniquely provided for maximum data throughput performance
especially when operating in a multi-channel system. The combination of the above greatly reduces the CPU’s
bandwidth requirement, increases performance, and reduces power consumption.
Data Rate
The M670 is capable of operation up to 16 Mbps at 3.3V with 4X internal sampling clock rate. The device can
operate at 3.3V with a 24 MHz crystal on pins XTAL1 and XTAL2, or external clock source of 64 MHz on
XTAL1 pin. With a typical crystal of 14.7456 MHz and through a software option, the user can set the prescaler
bit and sampling rate for data rates of up to 3.68 Mbps.
Enhanced Features
The rich feature set of the M670 is available through the internal registers. Automatic hardware/software flow
control, selectable transmit and receive FIFO trigger levels, selectable baud rates, infrared encoder/decoder,
modem interface controls, and a sleep mode are all standard features. MCR bit-5 provides a facility for turning
off (Xon) software flow control with any incoming (RX) character. The M670 includes new features such as 9-
bit (Multidrop) mode, auto RS-485 half-duplex direction control, different baud rate for TX and RX, fast IR mode
and fractional baud rate generator.
5