ak4103a AKM Semiconductor, Inc., ak4103a Datasheet - Page 19

• Manufacturer Part Number: ak4103a
• Description: 192khz 24-bit Dit
• Manufacturer: AKM Semiconductor, Inc.

ASAHI KASEI
n Line Driver
There is an RS422 line driver on chip. The AES3 specification states that the line driver shall have a balanced output
with an internal impedance of 110 ohms 20% and also requires a balanced output drive capability of 2 to 7 volts peak-
to-peak into 110 ohm load. The internal impedance of the RS422 driver along with a series resistors of 56 ohms realizes
this requirement. For consumer use(S/PDIF), the specifications require an output impedance of 75 ohms 20% and a
driver level of 0.5 20% volts peak to peak. A combination of 330 ohms in parallel with 100 ohms realizes this
requirement. The outputs can be set to ground by resetting the device or a software mute.
MS0251-E-00
TXP
TXN
TXP
TXN
Figure 17. Professional Output Driver Circuit
Figure 18. Consumer Output Driver Circuit
330
56
100
0.1u
0.1u
- 19 -
Transformer
Transformer
XLR Connector
RCA Phono
Connector
[AK4103A]
2003/07