mx25l3237d Macronix International Co., mx25l3237d Datasheet - Page 5

• Manufacturer Part Number: mx25l3237d
• Description: Serial Flash Memory
• Manufacturer: Macronix International Co.

P/N: PM1393
GENERAL
• Serial Peripheral Interface compatible -- Mode 0 and Mode 3
• 32M:33,554,432 x 1 bit structure or 16,772,216 x 2 bits (two I/O read mode) structure or 8,388,608 x 4 bits (four I/O
• 1024 Equal Sectors with 4K byte each (32Mb)
• 64 Equal Blocks with 64K byte each (32Mb)
• Power Supply Operation
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is from 1.5V to 2.5V
PERFORMANCE
• High Performance
• Low Power Consumption
• Typical 100,000 erase/program cycles
• 10 years data retention
SOFTWARE FEATURES
• Input Data Format
• Advanced Security Features
FEATURES
read mode) structure
- Any Sector can be erased individually
- Any Block can be erased individually
- 2.7 to 3.6 volt for read, erase, and program operations
- VI/O 1.65V to 3.6V for Input/Output
- Fast read (VI/O=2.7V~3.6V)
- Fast read (VI/O=1.65V~2.7V)
- When VI/O > 2.7V
- Serial clock of four I/O read mode : 75MHz (15pF + TTL Load), which is equivalent to 300MHz
- Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page)
- Byte program time: 9us (typical)
- Continuously program mode (automatically increase address under word program mode)
- Fast erase time: 90ms (typ.)/sector (4K-byte per sector) ; 0.7s(typ.) /block (64K-byte per block); 25s(typ.) /chip
- Low active read current: 25mA(max.) at 86MHz, 20mA(max.) at 66MHz and 10mA(max.) at 33MHz
- Low active programming current: 20mA (max.)
- Low active erase current: 20mA (max.)
- Low standby current: 20uA (max.)
- 1-byte Command code
- Block lock protection
The BP0-BP3 status bit defines the size of the area to be software protection against program and erase instructions
- 1 I/O: 86MHz with 8 dummy cycles
- 2 I/O: 75MHz with 4 dummy cycles
- 4 I/O: 75MHz with 6 dummy cycles
- 1 I/O: 40MHz with 8 dummy cycles
- 2 I/O: 33MHz with 4 dummy cycles
- 4 I/O: 33MHz with 6 dummy cycles
- Fast access time: 86MHz serial clock (15pF + 1TTL Load) and 66MHz serial clock (30pF + 1TTL Load)
32M-BIT [x 1/x 2/x 4] CMOS SERIAL FLASH
5
ADVANCED INFORMATION
MX25L3237D
REV. 0.02, JUN. 13, 2008