S9S12GN16F0MLF Freescale Semiconductor, S9S12GN16F0MLF Datasheet - Page 178

• Manufacturer Part Number: S9S12GN16F0MLF
• Description: 16-bit Microcontrollers - MCU 16-bit16k Flash 2k RAM
• Manufacturer: Freescale Semiconductor

Specifications of S9S12GN16F0MLF

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 16 KB
• Data Ram Size: 1024 B
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: TSSOP-20
• Mounting Style: SMD/SMT

Port Integration Module (S12GPIMV1)
2.3.12
180
PJ1
PJ0
IBEx = ( (ATDDIENH/L[IENx]=1) OR (ATDCTL1[ETRIGSEL]=0 AND ATDCTL2[ETRIGE]=1) OR
Pins AD15-0
The following sources contribute to enable the input buffers on port AD:
•
•
•
•
Taking the availability of the different sources on each pin into account the
following logic equation must be true to activate the digital input buffer for
general-purpose input use:
• Except 20 TSSOP and 32 LQFP: The SPI1 MOSI signal is mapped to this pin when used with the SPI
• 48 LQFP: The TIM channel 6 signal is mapped to this pin when used with the timer function. The TIM
• Except 20 TSSOP and 32 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
• Except 20 TSSOP and 32 LQFP: The SPI1 MISO signal is mapped to this pin when used with the SPI
• 48 LQFP: The PWM channel 6 signal is mapped to this pin when used with the PWM function. The
• Except 20 TSSOP and 32 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
function. Depending on the configuration of the enabled SPI1 the I/O state is forced to be input or
output.
forces the I/O state to be an output for a timer port associated with an enabled output.
48 LQFP: MOSI1 > IOC6 > GPO
64/100 LQFP: MOSI1 > GPO
function. Depending on the configuration of the enabled SPI1 the I/O state is forced to be input or
output.
enabled PWM channel forces the I/O state to be an output.
48 LQFP: MISO1 > PWM6 > GPO
64/100 LQFP: MISO1 > GPO
Digital input enable register bits set for each individual pin in ADC
External trigger function of ADC enabled on ADC channel
ADC channels routed to port C freeing up pins
Digital input enable register set bit in and ACMP
(PRR1[PRR1AN]=1) ) AND (ACDIEN=1)
Table 2-15. Port
MC9S12G Family Reference Manual,
J
NOTE
Pins PJ7-0 (continued)
Rev.1.23
Freescale Semiconductor
Eqn. 2-1