M25P64-VME6G NUMONYX, M25P64-VME6G Datasheet - Page 39

• Manufacturer Part Number: M25P64-VME6G
• Description: IC FLASH 64MBIT 50MHZ 8VDFPN
• Manufacturer: NUMONYX
• Series: Forté™r

Specifications of M25P64-VME6G

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 64M (8M x 8)
• Speed: 50MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-VDFPN
• Package: 8VDFPN EP
• Cell Type: NOR
• Density: 64 Mb
• Architecture: Sectored
• Block Organization: Symmetrical
• Typical Operating Supply Voltage: 3.3 V
• Sector Size: 64KByte x 128
• Timing Type: Synchronous
• Interface Type: Serial-SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8
9
Initial delivery state
The device is delivered with the memory array erased: all bits are set to 1 (each byte
contains FFh). The Status Register contains 00h (all Status Register bits are 0).
Maximum rating
Stressing the device outside the ratings listed in
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect
device reliability. Refer also to the Numonyx SURE Program and other relevant quality
documents.
Table 9.
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly) and the European
2. Avoid applying VPPH to the W/VPP pin during Bulk Erase with process technology T9HX devices,
3. JEDEC Std JESD22-A114A (C1=100 pF, R1 = 1500 Ω, R2 = 500 Ω).
Symbol
directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU
identified by process identification digit "4" in the device marking.
T
T
V
V
V
LEAD
V
STG
ESD
CC
PP
IO
Absolute maximum ratings
Storage Temperature
Lead Temperature during Soldering
Input and Output Voltage (with respect to Ground)
Supply Voltage
Fast Program/Erase Voltage
Electrostatic Discharge Voltage (Human Body model)
Parameter
(2)
Table 9
may cause permanent damage to
(3)
–2000
Min.
–0.5
–0.2
–0.2
–65
See note
V
Max.
2000
10.0
150
0.6
4.0
CC
(1)
+
Unit
°C
°C
V
V
V
V
39/55