STM8/128-MCKIT STMicroelectronics, STM8/128-MCKIT Datasheet - Page 6

• Manufacturer Part Number: STM8/128-MCKIT
• Description: EVAL KIT MOTOR CONTROL STM8S
• Manufacturer: STMicroelectronics
• Series: STM8Sr

Specifications of STM8/128-MCKIT

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: STM8S2xx
• Primary Attributes: Brushless DC (BLDC) & AC Induction (ACIM) Motors
• Secondary Attributes: Joystick & LCD User Interface
• Processor To Be Evaluated: STM8S
• Data Bus Width: 8 bit
• Operating Supply Voltage: 2.95 V to 5.5 V
• Silicon Manufacturer: ST Micro
• Silicon Core Number: STM8
• Features: Motor Control Applications, The Inverter Is Driven Using The Space Vector PWM Modulation Technique
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 497-10032

STM8/128-MCKIT hardware setup
3.1.2
3.1.3
3.1.4
6/22
Software
The STM8/128-MCKIT CD-ROM includes the BLDC and AC induction motor software
libraries.
When you receive the STM8/128-MCKIT, the STM8 microcontroller is programmed by
default with the BLDC sensorless firmware.
Documentation
The STM8/128-MCKIT CD-ROM also includes the following product documentation in PDF
format:
In the box with the STM8/128-MCKIT, there is also:
Components not provided
The STM8/128-MCKIT starter kit does not include:
An auxiliary power supply block TR30R (6)
The following cables:
–
–
–
–
–
A bag with three 0.1 ohm resistors is included to configure the MB459B board to
increase the maximum motor nominal current level up to 5 amps.
The STM3210B-MCKIT CD-ROM.
STM8Sxxx access line and performance line datasheets
STM8Sxxx reference manual
STM8/128-MCKIT motor control kit user manual (UM0709, the present manual)
STM8S three-phase BLDC software library v1.0 user manual (UM0708)
STM8S three-phase AC induction motor software library v1.0 user manual (UM0712)
STM8/128-EVAL user manual (UM0482)
MB459B power board user manual (UM0379)
SHINANO motor datasheet.
The MCD product finder
Product flyers and brochures
The MCD miniROM
A guarantee record card
A power supply: To use the STM8/128-MCKIT starter kit with the provided BLDC motor,
you need a 24V-3A minimum power supply.
An AC induction motor: The STM8/128-MCKIT can operate with an AC induction motor.
The provided firmware is designed to operate with the SELNI induction motor. It can be
ordered as an accessory with the following order code: ST7MC-MOT/IND. To use the
STM8/128-MCKIT starter kit with the Selni AC induction motor, you need a 42 V DC or
32 Veff AC power supply (polarity not important, earth connection recommended).
Motor cables (7)
A motor connector HE10 34-pin cable (8)
A USB cable (9)
One SWIM cable and the related adapter (10)
An auxiliary connector for BLDC sensorless HE10 20-pin cable (11)
Doc ID 15774 Rev 2
UM0709