SI3216PPQ1-EVB Silicon Laboratories Inc, SI3216PPQ1-EVB Datasheet - Page 109

• Manufacturer Part Number: SI3216PPQ1-EVB
• Description: BOARD EVAL W/SI3201 INTERFACE
• Manufacturer: Silicon Laboratories Inc
• Series: ProSLIC®r

Specifications of SI3216PPQ1-EVB

• Main Purpose: Interface, Analog Front End (AFE)
• Utilized Ic / Part: Si3216
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4.4. FSK Control
For detailed instructions on FSK signal generation, refer to “Application Note 32: FSK Generation” (AN32). These
registers support enhanced FSK generation mode, which is enabled by setting FSKEN = 1 (direct Register 108,
bit 6) and REL = 1 (direct Register 32, bit 6).
Addr.
Addr. D15
69
70
71
72
73
74
69
70
71
72
73
74
FSK Amplitude Coefficient for Space.
When FSKEN = 1 and REL = 1, this register sets the amplitude to be used when gener-
ating a space or 0. When the active timer (OAT1) expires, the value of this register is
loaded into oscillator 1 instead of OSC1X.
FSK Frequency Coefficient for Space.
When FSKEN = 1 and REL = 1, this register sets the frequency to be used when gener-
ating a space or 0. When the active timer (OAT1) expires, the value of this register is
loaded into oscillator 1 instead of OSC1.
FSK Amplitude Coefficient for Mark.
When FSKEN = 1 and REL = 1, this register sets the amplitude to be used when gener-
ating a mark or 1. When the active timer (OAT1) expires, the value of this register is
loaded into oscillator 1 instead of OSC1X.
FSK Frequency Coefficient for Mark.
When FSKEN = 1 and REL = 1, this register sets the frequency to be used when gener-
ating a mark or 1. When the active timer (OAT1) expires, the value of this register is
loaded into oscillator 1 instead of OSC1.
FSK Transition Parameter from 0 to 1.
When FSKEN = 1 and REL = 1, this register defines a gain correction factor that is
applied to signal amplitude when transitioning from a space (0) to a mark (1).
FSK Transition Parameter from 1 to 0.
When FSKEN = 1 and REL = 1, this register defines a gain correction factor that is
applied to signal amplitude when transitioning from a mark (1) to a space (0).
D14
D13
Table 43. FSK Control Indirect Registers Description
Table 42. FSK Control Indirect Registers Summary
D12
D11
D10
Description
D9
Rev. 1.0
FSK0X[15:0]
FSK1X[15:0]
FSK01[15:0]
FSK10[15:0]
FSK0[15:0]
FSK1[15:0]
D8
D7
D6
D5
D4
D3
D2
Reference Page
39 and AN32
39 and AN32
39 and AN32
39 and AN32
39 and AN32
39 and AN32
Si3216
D1
D0
109