FS2003(US) Equinox Technologies, FS2003(US) Datasheet - Page 37

• Manufacturer Part Number: FS2003(US)
• Description: PROGRAMMER PORTABLE HI-SPEED ISP
• Manufacturer: Equinox Technologies
• Series: FS2003r
• Type: Portable Production ISPr

Specifications of FS2003(US)

• Mfg Application Notes: ASCII Text Control Protocol Appl Note
• Contents: Programmer, Power Supply Adapter, Software, Cables and Documentation
• For Use With/related Products: Atmel/NXP 8051 MCUs and Atmel AVR MCUs
• Other names: 483-1003

2.10 Hardware - Fault Finding Guide
i.
ii.
iii.
34
power is applied to the Programmer /
Target System
No Programming Projects Loaded
FAIL LED constantly flashing
Target Vcc LED does not illuminate when
NO / INVALID
PROJECT LOADED!
FS2003 ISP Programmer - User Guide V1.08 – 1
•
•
•
•
•
•
•
•
•
•
Switch power off immediately in case of
a short-circuit !
Check that you have chosen the correct
ISP Header to connect to your Target
System.
Check that the ISP Cable is inserted the
correct away around into the ISP Header
Socket on the Target System.
If the Programmer is powering the Target
System, check that the ‘Vcc Jumper (J9)
is fitted.
If Programmer and Target System are
independently powered, check that the
‘Vcc Jumper (J9) is removed. Also check
that the Vcc line from the Target System
is definitely still connected to the
Programmer Vcc pin on one of the ISP
Headers.
If the programmer has never been used
before or the on-board FLASH Memory
Store has been erased, then the
programmer will display the message:
‘No / Invalid Project Loaded’. This is
normal as the programmer ‘FLASH
Memory Store’ is empty so the
programmer cannot be used in
Standalone Mode.
Please upload a valid project to the
programmer using EQTools and then try
again.
If you are running firmware 2.46 or below
then the FAIL LED will flash when you
initially power up the programmer.
To clear the FAIL LED condition, use the
<Up> / <Down> keys to select a
Programming Project and then press the
<Yes> key .
If there are no Programming Projects
Loaded into the Programmer – Flash
Memory Store, the FAIL LED will
continue to FLASH until at least one
Project is uploaded.
st
August 2008