DSPIC30F4013-30I/PT Microchip Technology, DSPIC30F4013-30I/PT Datasheet - Page 133

• Manufacturer Part Number: DSPIC30F4013-30I/PT
• Description: IC DSPIC MCU/DSP 48K 44TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F4013-30I/PT

• Program Memory Type: FLASH
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, POR, PWM, WDT
• Number Of I /o: 30
• Program Memory Size: 48KB (16K x 24)
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Data Rom Size: 1024 B
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, DM240002, DM300018, DM330011
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPAC30F006 - MODULE SKT FOR DSPIC30F 44TQFPAC164305 - MODULE SKT FOR PM3 44TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DSPIC30F401330IPT

19.4
The conversion trigger terminates acquisition and
starts the requested conversions.
The SSRC<2:0> bits select the source of the conver-
sion trigger. The SSRC bits provide for up to 4 alternate
sources of conversion trigger.
When SSRC<2:0> = 000, the conversion trigger is
under software control. Clearing the SAMP bit causes
the conversion trigger.
When SSRC<2:0> = 111 (Auto-Convert mode), the
conversion trigger is under A/D clock control. The
SAMC bits select the number of A/D clocks between
the start of acquisition and the start of conversion. This
provides the fastest conversion rates on multiple
channels. The SAMC bits must always be at least one
clock cycle.
Other trigger sources can come from timer modules or
external interrupts.
19.5
Clearing the ADON bit during a conversion aborts the
current conversion and stops the sampling sequencing
until the next sampling trigger. The ADCBUF is not
updated with the partially completed A/D conversion
sample. That is, the ADCBUF will continue to contain
the value of the last completed conversion (or the last
value written to the ADCBUF register).
If clearing of the ADON bit coincides with an auto-start,
the clearing has a higher priority and a new conversion
does not start.
19.6
The ADC conversion requires 14 T
the ADC conversion clock is software selected, using a
6-bit counter. There are 64 possible options for T
EQUATION 19-1:
 2010 Microchip Technology Inc.
Programming the Start of
Conversion Trigger
Aborting a Conversion
Selecting the ADC Conversion
Clock
T
AD
= T
CY
* (0.5*(ADCS<5:0> + 1))
CLOCK
ADC CONVERSION
AD
. The source of
AD
.
The internal RC oscillator is selected by setting the
ADRC bit.
For correct ADC conversions, the ADC conversion
clock (T
time of 334 nsec (for V
“Electrical Characteristics”
other operating conditions.
Example 19-1
ADCS<5:0> bits, assuming a device operating speed
of 30 MIPS.
EXAMPLE 19-1:
Since,
Sampling Time = Acquisition Time + Conversion Time
Therefore,
Sampling Rate =
If SSRC<2:0> = 111 and SAMC<4:0> = 00001
dsPIC30F3014/4013
Therefore,
Set ADCS<5:0> = 19
AD
ADCS<5:0> = 2
Minimum T
) must be selected to ensure a minimum T
Actual T
shows a sample calculation for the
= ~200 kHz
= 1 T
= 15 x 334 nsec
AD
T
(15 x 334 nsec)
AD
CY
=
AD
= 2 •
= 19
=
= 334 nsec
DD
ADC CONVERSION
CLOCK AND SAMPLING
RATE CALCULATION
= 334 nsec
= 33.33 nsec (30 MIPS)
+ 14 T
T
33.33 nsec
= 5V). Refer to
1
T
T
CY
2
AD
33.33 nsec
CY
334 nsec
2
(ADCS<5:0> + 1)
AD
for minimum T
– 1
DS70138G-page 133
(19 + 1)
– 1
Section 23.0
AD
under
AD