DSPIC30F4013-30I/PT Microchip Technology, DSPIC30F4013-30I/PT Datasheet - Page 91

• Manufacturer Part Number: DSPIC30F4013-30I/PT
• Description: IC DSPIC MCU/DSP 48K 44TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F4013-30I/PT

• Program Memory Type: FLASH
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, POR, PWM, WDT
• Number Of I /o: 30
• Program Memory Size: 48KB (16K x 24)
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Data Rom Size: 1024 B
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, DM240002, DM300018, DM330011
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPAC30F006 - MODULE SKT FOR DSPIC30F 44TQFPAC164305 - MODULE SKT FOR PM3 44TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DSPIC30F401330IPT

14.0
The Inter-Integrated Circuit (I
complete hardware support for both Slave and Multi-
Master modes of the I
standard with a 16-bit interface.
This module offers the following key features:
• I
• I
• I
• I
• Serial clock synchronization for I
• I
14.1
The hardware fully implements all the master and slave
functions of the I
specifications, as well as 7 and 10-bit addressing.
Thus, the I
a master on an I
FIGURE 14-1:
 2010 Microchip Technology Inc.
Note:
operation.
ing.
addressing.
master and slaves.
used as a handshake mechanism to suspend and
resume serial transfer (SCLREL control).
collision and arbitrates accordingly.
2
2
2
2
2
C interface supporting both master and slave
C Slave mode supports 7-bit and 10-bit address-
C Master mode supports 7-bit and 10-bit
C port allows bidirectional transfers between
C supports multi-master operation; detects bus
I
Operating Function Description
2
2
C™ MODULE
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
'dsPIC30F Family Reference Manual'
(DS70046).
C module can operate either as a slave or
2
C bus.
2
C Standard and Fast mode
PROGRAMMER’S MODEL
Bit 15
Bit 15
2
C serial communication
2
C
TM
2
) module provides
C port can be
Bit 9
Bit 8
Bit 7
Bit 7
14.1.1
The following types of I
• I
• I
• I
See the I
14.1.2
I
SDA pin is data.
14.1.3
I2CCON and I2CSTAT are control and status registers,
respectively. The I2CCON register is readable and writ-
able. The lower 6 bits of I2CSTAT are read-only. The
remaining bits of the I2CSTAT are read/write.
I2CRSR is the shift register used for shifting data,
whereas I2CRCV is the buffer register to which data
bytes are written, or from which data bytes are read.
I2CRCV is the receive buffer as shown in
I2CTRN is the transmit register to which bytes are
written during a transmit operation, as shown in
Figure
The I2CADD register holds the slave address. A status
bit, ADD10, indicates 10-Bit Addressing mode. The
I2CBRG acts as the Baud Rate Generator reload
value.
In receive operations, I2CRSR and I2CRCV together
form a double-buffered receiver. When I2CRSR
receives a complete byte, it is transferred to I2CRCV
and
transmission, the I2CTRN is not double-buffered.
2
C has a 2-pin interface: the SCL pin is clock and the
Note:
2
2
2
dsPIC30F3014/4013
C slave operation with 7-bit addressing
C slave operation with 10-bit addressing
C master operation with 7-bit or 10-bit addressing
an
14-2.
2
C programmer’s model in
Bit 0
Bit 0
Bit 0
Bit 0
Bit 0
Bit 0
interrupt
VARIOUS I
PIN CONFIGURATION IN I
I
Following a Restart condition in 10-bit
mode, the user only needs to match the
first 7-bit address.
2
C REGISTERS
I2CRCV (8 bits)
I2CTRN (8 bits)
I2CBRG (9 bits)
I2CCON (16 bits)
I2CSTAT (16 bits)
I2CADD (10 bits)
pulse
2
C operation are supported:
2
C MODES
is
generated.
Figure
DS70138G-page 91
2
Figure
14-1.
C MODE
During
14-1.