PIC32MX460F512L-80I/PT Microchip Technology, PIC32MX460F512L-80I/PT Datasheet - Page 61

• Manufacturer Part Number: PIC32MX460F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX460F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit, 1 x 32 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKDM320003 - BOARD DEMO USB PIC32 OTGAC244006 - KIT MPLAB REAL ICE TRACEAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

APPENDIX A:
FIGURE A-1:
© 2010 Microchip Technology Inc.
Program Flash Memory
Configuration Words
Boot Page 0
Boot Page 1
Boot Page 2
Debug Page
(4 x 32 bits)
FLASH MEMORY MAP
PIC32MX FLASH
MEMORY MAP
0x1F002FF0
0x1F002FFF
0x1F000000
0x1F001FFF
0x1D000000
0x1D007FFF
APPENDIX B:
Flash programmers process the standard HEX format
used by the Microchip development tools. The format
supported is the Intel
Please refer to Appendix A in the “MPASM Users
Guide” (DS33014) for more information about hex file
formats.
The basic format of the hex file is:
Each data record begins with a 9-character prefix and
always ends with a 2-character checksum. All records
begin with ‘:’, regardless of the format. The individual
elements are described below.
• BB - is a two-digit hexadecimal byte count
• AAAA - is a four-digit hexadecimal address
• TT - is a two-digit record type that will be ‘00’ for
• HHHH - is a four-digit hexadecimal data word.
• CC - is a two-digit hexadecimal checksum that is
Because the Intel hex file format is byte-oriented, and
the 16-bit program counter is not, program memory
sections require special treatment. Each 24-bit pro-
gram word is extended to 32 bits by inserting a so-
called “phantom byte”. Each program memory address
is multiplied by 2 to yield a byte address.
As an example, a section that is located at 0x100 in
program memory will be represented in the hex file as
0x200.
The hex file will be produced with the following
contents:
Notice that the data record (line 2) has a load address
of 0200, while the source code specified address
0x100. Note also that the data is represented in “little-
endian” format, meaning the Least Significant Byte
appears first. The phantom byte appears last, just
before the checksum.
representing the number of data bytes that appear
on the line. Divide this number by two to get the
number of words per line.
representing the starting address of the data
record. Format is high byte first followed by low
byte. The address is doubled because this format
only supports 8 bits. Divide the value by two to
find the real device address.
data records, ‘01’ for end-of-file records and ‘04’
for extended-address record.
Format is low byte followed by high byte. There
will be BB/2 data words following TT.
the 2’s complement of the sum of all the
preceding bytes in the line record.
:BBAAAATTHHHH...HHHHCC
:020000040000fa
:040200003322110096
:00000001FF
HEX FILE FORMAT
®
HEX32 Format (INHX32).
PIC32MX
DS61145G-page 61