C8051F321-GM Silicon Laboratories Inc, C8051F321-GM Datasheet - Page 24

• Manufacturer Part Number: C8051F321-GM
• Description: IC 8051 MCU 16K FLASH 28MLP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F32xr

Specifications of C8051F321-GM

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 21
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 2.25 KB
• Interface Type: I2C/SMBus/SPI/UART/USB
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F320DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 10-bit or 17-ch x 10-bit
• No. Of I/o's: 21
• Ram Memory Size: 1280Byte
• Cpu Speed: 25MHz
• No. Of Timers: 4
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1480 - DAUGHTER CARD TOOLSTCK C8051F321770-1006 - ISP 4PORT FOR SILABS C8051F MCU336-1449 - ADAPTER PROGRAM TOOLSTICK F321336-1260 - DEV KIT FOR C8051F320/F321
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1261

C8051F320/1
1.5.
The C8051F320/1 devices include on-chip Silicon Labs 2-Wire (C2) debug circuitry that provides non-intrusive, full
speed, in-circuit debugging of the production part installed in the end application.
Silicon Labs' debugging system supports inspection and modification of memory and registers, breakpoints, and sin-
gle stepping. No additional target RAM, program memory, timers, or communications channels are required. All the
digital and analog peripherals are functional and work correctly while debugging. All the peripherals (except for the
USB, ADC, and SMBus) are stalled when the MCU is halted, during single stepping, or at a breakpoint in order to
keep them synchronized.
The C8051F310DK development kit provides all the hardware and software necessary to develop application code
and perform in-circuit debugging with the C8051F320/1 MCUs. The kit includes software with a developer's studio
and debugger, an integrated 8051 assembler, and an RS-232 to C2 serial adapter. It also has a target application board
with the associated MCU installed and prototyping area, plus the RS-232 and C2 cables, and wall-mount power sup-
ply. The Development Kit requires a Windows 95/98/NT/ME/2000 computer with one available RS-232 serial port.
As shown in Figure 1.7, the PC is connected via RS-232 to the Serial Adapter. A six-inch ribbon cable connects the
Serial Adapter to the user's application board, picking up the two C2 pins and VDD and GND. The Serial Adapter
takes its power from the application board. For applications where there is not sufficient power available from the tar-
get board, the provided power supply can be connected directly to the Serial Adapter.
The Silicon Labs IDE interface is a vastly superior developing and debugging configuration, compared to standard
MCU emulators that use on-board "ICE Chips" and require the MCU in the application board to be socketed. Silicon
Labs' debug paradigm increases ease of use and preserves the performance of the precision analog peripherals.
24
On-Chip Debug Circuitry
Figure 1.7. Development/In-System Debug Diagram
WINDOWS 95/98/NT/ME/2000
C2 (x2), VDD, GND
RS-232
VDD
Development Environment
GND
Silicon Labs Integrated
C8051F320
Rev. 1.1
Adapter
TARGET PCB
Serial