HD64F3687GFPV Renesas Electronics America, HD64F3687GFPV Datasheet - Page 370

• Manufacturer Part Number: HD64F3687GFPV
• Description: IC H8 MCU FLASH 56K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3687GFPV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 56KB (56K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• Package: 64LQFP
• Family Name: H8
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 45
• Interface Type: I2C/SCI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 17 I
17.7
17.7.1
In master mode, when the start/stop conditions are issued (retransmitted) at the specific timing
under the following condition 1 or 2, such conditions may not be output successfully. To avoid
this, issue (retransmit) the start/stop conditions after the fall of the ninth clock is confirmed. Check
the SCLO bit in the I
1. When the rising of SCL falls behind the time specified in section 17.6, Bit Synchronous
2. When the bit synchronous circuit is activated by extending the low period of eighth and ninth
17.7.2
If the WAIT bit is set to 1, and the SCL signal is driven low for two or more transfer clocks by the
slave device at the eighth and ninth clocks, the high period of ninth clock may be shortened. To
avoid this, set the WAIT bit in ICMR to 0.
Rev.5.00 Nov. 02, 2005 Page 336 of 500
REJ09B0027-0500
Circuit, by the load of the SCL bus (load capacitance or pull-up resistance)
clocks, that is driven by the slave device
Usage Notes
Issue (Retransmission) of Start/Stop Conditions
WAIT Setting in I
2
C Bus Interface 2 (IIC2)
2
C control register 2 (IICR2) to confirm the fall of the ninth clock.
2
C Bus Mode Register (ICMR)