HD64F38024DV Renesas Electronics America, HD64F38024DV Datasheet - Page 703

• Manufacturer Part Number: HD64F38024DV
• Description: IC H8/SLP MCU FLASH 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300L SLPr

Specifications of HD64F38024DV

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: SCI
• Peripherals: LCD, PWM, WDT
• Number Of I /o: 51
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Description Format: .ALIGN <boundary alignment value>
Description:
.ALIGN
The label field is not used.
.ALIGN corrects the location-counter value to be a multiple of the boundary
alignment value. Executable instructions and data can be allocated on
specific boundary values (address multiples) by using the .ALIGN directive.
The location counter value must be specified as follows:
The values allowed for the boundary alignment value are powers of 2.
The boundary alignment value differs depending on the specification of the
address area.
When .ALIGN is used in a relative section the following must be satisfied:
When .ALIGN is used in a code section, the assembler inserts NOP
instructions in the object code* to adjust the value of the location counter.
Odd byte size areas are filled with H'00.
When .ALIGN is used in a data, dummy, or stack section, the assembler only
adjusts the value of the location counter and does not insert an object code on
the memory.
Note: This object code is not displayed in the assemble listing.
The specification must be a constant value, and,
Forward reference symbols must not appear in the specification.
alignment value specified by .ALIGN
Boundary alignment value specified by .SECTION
Boundary
689