C8051F901-GU Silicon Laboratories Inc, C8051F901-GU Datasheet - Page 64

• Manufacturer Part Number: C8051F901-GU
• Description: IC MCU 8BIT 8KB FLASH 24QSOP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F9xxr

Specifications of C8051F901-GU

• Program Memory Type: FLASH
• Program Memory Size: 8KB (8K x 8)
• Package / Case: 24-QSOP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 16
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 3.6 V
• Data Converters: A/D 15x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F9x
• Core: 8051
• Data Ram Size: 768 B
• Interface Type: UART
• Maximum Clock Frequency: 25 MHz
• Number Of Timers: 4
• Operating Supply Voltage: 0.9 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F912DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Package: 24QSOP
• Device Core: 8051
• Family Name: C8051F90x
• Maximum Speed: 25 MHz
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1847-5

C8051F91x-C8051F90x
5.2.2. Tracking Modes
Each ADC0 conversion must be preceded by a minimum tracking time in order for the converted result to
be accurate. The minimum tracking time is given in Table 4.10. The AD0TM bit in register ADC0CN
controls the ADC0 track-and-hold mode. In its default state when Burst Mode is disabled, the ADC0 input
is continuously tracked, except when a conversion is in progress. When the AD0TM bit is logic 1, ADC0
operates in low-power track-and-hold mode. In this mode, each conversion is preceded by a tracking
period of 3 SAR clocks (after the start-of-conversion signal). When the CNVSTR signal is used to initiate
conversions in low-power tracking mode, ADC0 tracks only when CNVSTR is low; conversion begins on
the rising edge of CNVSTR (see Figure 5.2). Tracking can also be disabled (shutdown) when the device is
in low power standby or sleep modes. Low-power track-and-hold mode is also useful when AMUX settings
are frequently changed, due to the settling time requirements described in “5.2.4. Settling Time
Requirements” on page 66.
64
(AD0CM[2:0]=000, 001,010
Timer 1, Timer 3 Overflow
Figure 5.2. 10-Bit ADC Track and Conversion Example Timing (BURSTEN = 0)
Write '1' to AD0BUSY,
(AD0CM[2:0]=100)
Timer 0, Timer 2,
SAR Clocks
AD0TM=1
AD0TM=0
011, 101)
AD0TM=1
AD0TM=0
CNVSTR
Clocks
Clocks
SAR
SAR
Low Power
or Convert
Low Power
or Convert
Track or
A. ADC0 Timing for External Trigger Source
Convert
Track or Convert
B. ADC0 Timing for Internal Trigger Source
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Track
Track
Rev. 1.0
1 2 3 4 5 6 7 8 9
Convert
Convert
Convert
Convert
10 11 12 13 14
Low Power Mode
Track
Low Power
Mode
Track