PIC16F688-E/ML Microchip Technology, PIC16F688-E/ML Datasheet - Page 511

• Manufacturer Part Number: PIC16F688-E/ML
• Description: IC PIC MCU FLASH 4KX14 16QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F688-E/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 12
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 16-QFN
• Controller Family/series: PIC16F
• No. Of I/o's: 12
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: EUSART, RS- 232, SCI, USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014, DM164120-4
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164324 - MODULE SKT FOR MPLAB 8DFN/16QFNXLT16QFN1 - SOCKET TRANSITION 14DIP TO 16QFNAC162061 - HEADER INTRFC MPLAB ICD2 20PINAC162056 - HEADER INTERFACE ICD2 16F688
• Lead Free Status / Rohs Status: Details

Section 28. ICSP
28.2
Entering In-Circuit Serial Programming Mode
The device is placed into a program/verify mode by holding the RB6 and RB7 pins low while rais-
ing the MCLR (V
) pin from V
to V
(see programming specification) and having V
at the
PP
IL
IHH
DD
programming voltage. RB6 becomes the programming clock and RB7 becomes the program-
ming data. Both RB6 and RB7 are Schmitt Trigger inputs in this mode, and when RB7 is driving
data it is a CMOS output driver.
After reset, to place the device into programming/verify mode, the program counter (PC) is at
location 00h. A 6-bit command is then supplied to the device. Some commands then specify that
14-bits of program data are then supplied to or read from the device, depending on if the com-
mand was a load or a read. For complete details of serial programming, please refer to the device
specific Programming Specifications.
During the In-Circuit Serial Programming Mode, the WDT circuitry is disabled from generating a
device reset.
28
1997 Microchip Technology Inc.
DS31028A-page 28-3