PIC16F688-E/ML Microchip Technology, PIC16F688-E/ML Datasheet - Page 620

• Manufacturer Part Number: PIC16F688-E/ML
• Description: IC PIC MCU FLASH 4KX14 16QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F688-E/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 12
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 16-QFN
• Controller Family/series: PIC16F
• No. Of I/o's: 12
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: EUSART, RS- 232, SCI, USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014, DM164120-4
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164324 - MODULE SKT FOR MPLAB 8DFN/16QFNXLT16QFN1 - SOCKET TRANSITION 14DIP TO 16QFNAC162061 - HEADER INTRFC MPLAB ICD2 20PINAC162056 - HEADER INTERFACE ICD2 16F688
• Lead Free Status / Rohs Status: Details

PICmicro MID-RANGE MCU FAMILY
31.3.2
31.3.2.1
DS31031A-page 31-8
2000
1800
1600
1400
1200
1000
I
RC Measurements
DD
800
600
400
200
0
0.0
vs. Frequency
† R = 10 k
‡ R = 5 k
I
taken with all I/O as inputs, either pulled high or low. That is, there are no floating inputs, nor are
any pins driving an output (with a load).
The I
the DCS (Data Collection System). The DCS accurately reflects the device and specified com-
ponent values, that is, it does not add stray capacitance or current.
For the RC measurement, the DCS selects a resistor and capacitor value, and then varies the
voltage over the specified range. As the voltage is changed, the frequency of operation changes.
For a fixed RC, as V
has been taken, the RC value is changed and the measurements are taken again. Each point on
the graph corresponds to a device voltage, resistor value (R), and capacitor value (C).
Figure 31-9:
DD
0.5
is the current (I) that the device consumes when the device is in operating mode. This test is
DD
vs. Frequency charts measure the results on a Microchip automated bench setup, called
1.0
Example Typical I
DD
1.5
increases, the frequency increases. After the measurement, at this RC,
Frequency (MHz)
2.0
DD
†
vs. Frequency (RC Mode @ 22 pF, 25 C)
2.5
3.0
3.5
Shaded area is
beyond recommended range
1997 Microchip Technology Inc.
4.0
‡
4.5
6.0V
5.5V
5.0V
4.5V
4.0V
3.5V
3.0V
2.5V