AT90CAN32-16AUR Atmel, AT90CAN32-16AUR Datasheet - Page 254

• Manufacturer Part Number: AT90CAN32-16AUR
• Description: MCU AVR 32K FLASH 16MHZ 64-TQFP
• Manufacturer: Atmel
• Series: AVR® 90CANr

Specifications of AT90CAN32-16AUR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Data Bus Width: 8 bit
• Mounting Style: SMD/SMT
• For Use With: ATSTK600 - DEV KIT FOR AVR/AVR32ATDVK90CAN1 - KIT DEV FOR AT90CAN128 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.10.3
254
AT90CAN32/64/128
CAN General Interrupt Register - CANGIT
This flag does not generate an interrupt.
• Bit 1 – BOFF: Bus Off Mode
BOFF gives the information of the state of the CAN channel. Only entering in bus off mode gen-
erates the BOFFIT interrupt.
• Bit 0 – ERRP: Error Passive Mode
ERRP gives the information of the state of the CAN channel. This flag does not generate an
interrupt.
• Bit 7 – CANIT: General Interrupt Flag
This is a read only bit.
• Bit 6 – BOFFIT: Bus Off Interrupt Flag
Writing a logical one resets this interrupt flag. BOFFIT flag is only set when the CAN enters in
bus off mode (coming from error passive mode).
• Bit 5 – OVRTIM: Overrun CAN Timer
Writing a logical one resets this interrupt flag. Entering in CAN timer overrun interrupt handler
also reset this interrupt flag
• Bit 4 – BXOK: Frame Buffer Receive Interrupt
Writing a logical one resets this interrupt flag. BXOK flag can be cleared only if all CONMOB
fields of the MOb’s of the buffer have been re-written before.
Initial Value
Read/Write
Bit
– 0 - CAN controller disable: because an enable/standby command is not immediately
– 1 - CAN controller enable.
– 0 - no bus off mode.
– 1 - bus off mode.
– 0 - no error passive mode.
– 1 - error passive mode.
– 0 - no interrupt.
– 1 - CAN interrupt: image of all the CAN controller interrupts except for OVRTIM
– 0 - no interrupt.
– 1 - bus off interrupt when the CAN enters in bus off mode.
– 0 - no interrupt.
– 1 - CAN timer overrun interrupt: set when the CAN timer switches from 0xFFFF to 0.
– 0 - no interrupt.
effective, this status gives the true state of the chosen mode.
interrupt. This bit can be used for polling method.
CANIT
R
7
0
BOFFIT
R/W
6
0
OVRTIM
R/W
5
0
BXOK
R/W
0
4
SERG
R/W
3
0
CERG
R/W
2
0
FERG
R/W
1
0
AERG
R/W
0
0
CANGIT
7679H–CAN–08/08