DSPIC30F2011-30I/ML Microchip Technology, DSPIC30F2011-30I/ML Datasheet - Page 25

• Manufacturer Part Number: DSPIC30F2011-30I/ML
• Description: IC DSPIC MCU/DSP 12K 28QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2011-30I/ML

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 12
• Flash Memory Size: 12KB
• Supply Voltage Range: 2.5V To 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DAF30-4 - DEVICE ATP FOR ICE4000
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F201130IML

8.5
All commands that are supported by the programming
executive are described in
Command”
Command”.
8.5.1
The SCHECK command instructs the programming
executive to do nothing, but generate a response. This
command is used as a “sanity check” to verify that the
programming executive is operational.
Expected Response (2 words):
0x1000
0x0002
© 2010 Microchip Technology Inc.
15
Opcode
Length
Note:
Opcode
Field
Command Descriptions
SCHECK COMMAND
This instruction is not required for
programming,
development purposes only.
12 11
through
0x0
0x1
Section 8.5.11
but
Section 8.5.1 “SCHECK
Description
Length
is
provided
“QVER
for
0
8.5.2
The READD command instructs the programming
executive to read N 16-bit words of memory starting
from the 24-bit address specified by Addr_MSB and
Addr_LS. This command can only be used to read
16-bit data. It can be used to read data EEPROM,
Configuration registers and the device ID.
Expected Response (2+N words):
0x1100
N + 2
Data word 1
...
Data word N
15
Opcode
Length
Reserved0
N
Reserved1
Addr_MSB
Addr_LS
Reserved0
Note:
Opcode
Field
Reserved1
12 11
READD COMMAND
Reading unimplemented memory will
cause the programming executive to
reset.
0x1
0x4
0x0
Number of 16-bit words to read
(max of 2048)
0x0
MSB of 24-bit source address
LS 16 bits of 24-bit source address
Addr_LS
8 7
Description
Length
N
Addr_MSB
DS70102K-page 25
0