AT32UC3B0128-A2UT Atmel, AT32UC3B0128-A2UT Datasheet - Page 571

• Manufacturer Part Number: AT32UC3B0128-A2UT
• Description: IC MCU AVR32 128KB FLASH 64-TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3B0128-A2UT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: I²C, IrDA, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, SPI, USART
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 44
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1101
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 64TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATSTK600-TQFP64-2 - STK600 SOCKET/ADAPTER FOR 64-TQFATEVK1101 - KIT DEV/EVAL FOR AVR32 AT32UC3B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

26.3
Figure 26-1. ABDAC Block Diagram
26.4
Table 26-1.
26.5
26.5.1
32059K–03/2011
Pin Name
DATA0
DATA1
DATAN0
DATAN1
User Interface
Block Diagram
I/O Lines Description
Product Dependencies
I/O Lines
PM
I/O Lines Description
CHANNEL0[15:0]
CHANNEL1[15:0]
sample_clk
GCLK_ABDAC
In order to use this module, other parts of the system must be configured correctly, as described
below.
The output pins used for the output bitstream from the Audio Bitstream DAC may be multiplexed
with IO lines.
Before using the Audio Bitstream DAC, the I/O Controller must be configured in order for the
Audio Bitstream DAC I/O lines to be in Audio Bitstream DAC peripheral mode.
Pin Description
Output from Audio Bitstream DAC Channel 0
Output from Audio Bitstream DAC Channel 1
Inverted output from Audio Bitstream DAC Channel 0
Inverted output from Audio Bitstream DAC Channel 1
Clock Generator
Equalization FIR
Equalization FIR
bit_clk
Audio Bitstream DAC
(INT=128)
(INT=128)
COMB
COMB
Sigma-Delta
Sigma-Delta
DA-MOD
DA-MOD
AT32UC3B
Output
Output
Output
Output
Type
DATA0
DATA1
571