HD6417727BP160CV Renesas Electronics America, HD6417727BP160CV Datasheet - Page 958

• Manufacturer Part Number: HD6417727BP160CV
• Description: IC SH MPU ROMLESS 240BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727BP160CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 160MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.7 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-BGA
• Package: 240CSP
• Family Name: SuperH
• Maximum Speed: 160 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 104
• Interface Type: SCI/USB
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 30 PC Card Controller (PCC)
30.2.4
The area 6 card status change interrupt enable register (PCC0CSCIER) is an 8-bit
readable/writable register. PCC0CSCIER enables or disables interrupt requests for interrupt
sources for the PC card connected to area 6. When a PCC0CSCIER is set to 1, the corresponding
interrupt is enabled, and when the bit is cleared to 0, the interrupt is disabled. PCC0CSCIER is
initialized by a power-on reset but retains its value in a manual reset and in software standby
mode.
Bit 7—PCC0 Card Reset Enable (P0CRE): When this bit is set to 1, and when the CD1 and
CD2 pins detect that a PC card is connected to area 6, the area 6 general control register
(PCC0GCR) is initialized.
Bit 7: P0CRE
0
1
Rev.6.00 Mar. 27, 2009 Page 900 of 1036
REJ09B0254-0600
Initial value:
Bit name:
Area 6 Card Status Change Interrupt Enable Register (PCC0CSCIER)
R/W:
Bit:
P0CRE IREQE1 IREQE0 P0SCE
Description
The area 6 general control register (PCC0GCR) is not initialized even if a
PC card is detected in area 6
The area 6 general control register (PCC0GCR) is initialized when a PC
card is detected connected to area 6
R/W
7
0
R/W
6
0
R/W
5
0
R/W
4
0
P0CDE
R/W
3
0
P0RE
R/W
2
0
P0BWE P0BDE
R/W
0
1
(Initial value)
R/W
0
0