ATMEGA88-20PU Atmel, ATMEGA88-20PU Datasheet - Page 288

• Manufacturer Part Number: ATMEGA88-20PU
• Description: IC AVR MCU 8K 20MHZ 5V 28DIP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA88-20PU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Cpu Family: ATmega
• Device Core: AVR
• Device Core Size: 8b
• Frequency (max): 20MHz
• Interface Type: SPI/TWI/USART
• Total Internal Ram Size: 1KB
• # I/os (max): 23
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 6-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Through Hole
• Pin Count: 28
• Package Type: PDIP
• Processor Series: ATMEGA8x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRTS2080A, ATASTK512-EK1-IND
• Minimum Operating Temperature: - 40 C
• Package: 28PDIP
• Family Name: ATmega
• Maximum Speed: 20 MHz
• For Use With: ATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVRATAVRISP2 - PROGRAMMER AVR IN SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

27.5
27.6
27.6.1
288
Page Size
Parallel Programming Parameters, Pin Mapping, and Commands
ATmega48/88/168
Signal Names
Table 27-9.
Table 27-10. No. of Words in a Page and No. of Pages in the EEPROM
This section describes how to parallel program and verify Flash Program memory, EEPROM
Data memory, Memory Lock bits, and Fuse bits in the ATmega48/88/168. Pulses are assumed
to be at least 250 ns unless otherwise noted.
In this section, some pins of the ATmega48/88/168 are referenced by signal names describing
their functionality during parallel programming, see
described in the following table are referenced by pin names.
The XA1/XA0 pins determine the action executed when the XTAL1 pin is given a positive pulse.
The bit coding is shown in
When pulsing WR or OE, the command loaded determines the action executed. The different
Commands are shown in
Device
ATmega48
ATmega88
ATmega168
Device
ATmega48
ATmega88
ATmega168
No. of Words in a Page and No. of Pages in the Flash
Flash Size
(4 Kbytes)
(8 Kbytes)
(16 Kbytes)
EEPROM
256 bytes
512 bytes
512 bytes
2K words
4K words
8K words
Size
Table
Table
Page Size
32 words
32 words
64 words
4 bytes
4 bytes
4 bytes
27-14.
Page
Size
27-13.
PCWORD
PCWORD
EEA[1:0]
EEA[1:0]
EEA[1:0]
PC[4:0]
PC[4:0]
PC[5:0]
Figure 27-1
Pages
No. of
Pages
No. of
128
128
128
128
64
64
and
Table
PCPAGE
PCPAGE
EEA[7:2]
PC[10:5]
PC[11:5]
PC[12:6]
EEA[8:2]
EEA[8:2]
27-11. Pins not
2545S–AVR–07/10
EEAMSB
PCMSB
10
11
12
7
8
8