Z8F6422AR020SC2104 Zilog, Z8F6422AR020SC2104 Datasheet - Page 214

• Manufacturer Part Number: Z8F6422AR020SC2104
• Description: IC ENCORE MCU FLASH 64K 64LQFP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F6422AR020SC2104

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 46
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 64-LQFP
• For Use With: 269-4678 - KIT DEV FOR Z8F642 MCU 44 PIN269-4677 - KIT DEV FOR Z8F642 MCU 28PIN269-4540 - KIT DEV FOR Z8 ENCORE 16K TO 64K
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: 269-3641

On-Chip Debugger Commands
Table 101. On-Chip Debugger Commands
PS019921-0308
Debug Command
Read OCD Revision
Read OCD Status
Register
Read Runtime Counter
Write OCD Control
Register
Read OCD Control
Register
Write Program Counter
Read Program Counter
Write Register
Read Register
Write Program Memory
Read Program Memory
Write Data Memory
Read Data Memory
The host communicates to the On-Chip Debugger by sending OCD commands using the
DBG interface. During normal operation, only a subset of the OCD commands are avail-
able. In DEBUG mode, all OCD commands become available unless the user code and
control registers are protected by programming the Read Protect Option Bit (RP). The
Read Protect Option Bit prevents the code in memory from being read out of the Z8
Encore! XP
commands are disabled.
mands. Each OCD command is described in detail in the bulleted list following
Table 101
(normal operation) and those commands that are disabled by programming the Read Pro-
tect Option Bit.
indicates those commands that operate when the device is not in DEBUG mode
Command
Byte
®
F64XX Series products. When this option is enabled, several of the OCD
0AH
0BH
0CH
0DH
02H
04H
05H
06H
07H
09H
00H
03H
08H
Table 101
Enabled when
NOT in DEBUG
mode?
contains a summary of the On-Chip Debugger com-
Yes
Yes
Yes
Yes
-
-
-
-
-
-
-
-
-
Disabled by
Read Protect Option Bit
Only writes of the Flash Memory Control
the Mass Erase command is allowed to
registers are allowed. Additionally, only
be written to the Flash Control register.
Z8 Encore! XP
Cannot clear DBGMODE bit
Product Specification
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
-
-
-
-
®
On-Chip Debugger
F64XX Series
Table
101.
200