XC56309VF100A Freescale Semiconductor, XC56309VF100A Datasheet - Page 169

• Manufacturer Part Number: XC56309VF100A
• Description: IC DSP 24BIT FIXED-POINT 196-BGA
• Manufacturer: Freescale Semiconductor
• Series: DSP563xxr
• Type: Fixed Pointr

Specifications of XC56309VF100A

• Interface: Host Interface, SSI, SCI
• Clock Rate: 100MHz
• Non-volatile Memory: ROM (576 B)
• On-chip Ram: 24kB
• Voltage - I/o: 3.30V
• Voltage - Core: 3.30V
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 196-MAPBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Serial Communication Interface (SCI)
The SCI provides a full-duplex port for serial communication with other DSPs, microprocessors,
or peripherals such as modems. The SCI interfaces without additional logic to peripherals that
use TTL-level signals. With a small amount of additional logic, the SCI can connect to peripheral
interfaces that have non-TTL level signals, such as RS-232, RS-422, and so on. This interface
uses three dedicated signals: transmit data, receive data, and SCI serial clock. It supports
industry-standard asynchronous bit rates and protocols, as well as high-speed synchronous data
transmission. SCI asynchronous protocols include a multidrop mode for master/slave operation
with wake-up on idle line and wake-up on address bit capability. This mode allows the
DSP56309 to share a single serial line efficiently with other peripherals.
The SCI consists of separate transmit and receive sections that can operate asynchronously with
respect to each other. A programmable baud rate generator supplies the transmit and receive
clocks. An enable vector and an interrupt vector are included so that the baud-rate generator can
function as a general-purpose timer when the SCI is not using it, or when the interrupt timing is
the same as that used by the SCI.
8.1 Operating Modes
The operating modes for the DSP56309 SCI are as follows:
These modes are selected by the SCR WD[2–0] bits. Synchronous data mode is essentially a
high-speed shift register for I/O expansion and stream-mode channel interfaces. A gated transmit
and receive clock compatible with the Intel 8051 serial interface mode 0 synchronizes data.
Asynchronous modes are compatible with most UART-type serial devices. Standard RS-232
communication links are supported by these modes. Multidrop Asynchronous mode is
Freescale Semiconductor
8-bit synchronous (shift register mode)
10-bit asynchronous (1 start, 8 data, 1 stop)
11-bit asynchronous (1 start, 8 data, 1 even parity, 1 stop)
11-bit asynchronous (1 start, 8 data, 1 odd parity, 1 stop)
11-bit multidrop asynchronous (1 start, 8 data, 1 data type, 1 stop)
This mode is used for master/slave operation with wake-up on idle line and wake-up on
address bit capability. It allows the DSP56309 to share a single serial line efficiently with
other peripherals.
DSP56309 User’s Manual, Rev. 1
8
8-1